furuno navigational echo sounder fe-700 manual

This sentence is transmitted at intervals not exceeding 2 s and is always accompanied by RMB when a destination waypoint is active. The transducer may become damaged. Do not open the equipment. Only qualified personnel should work inside the equipment. Immediately turn off the power at the switchboard if water leaks into the equipment. Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service. Do not disassemble or modify the equipment. Fire, electrical shock or serious injury can result. Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire. Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service. Make sure no rain or water splash leaks into the equipment. Fire or electrical shock can result if water leaks in the equipment. Use the proper fuse. Use of a wrong fuse can result in equipment damage and void the warranty. WARNING LABEL A warning label is attached to the equipment. Do not remove the label. If the label is missing or illegible, contact a FURUNO agent or dealer.WARNINGTo avoid electrical shock, do not remove cover. No user-serviceable parts inside. Name: Warning Label (1) Type: 86-003-1011-1 Code No.: 100-236-231 About the TFT LCDThe TFT LCD is constructed using the latest LCD techniques, and displays 99.99% of its pixels. The remaining 0.01% of the pixels may drop out or blink, however this is not an indication of malfunction.Digital Depth Indicator 65-5-0100-003 Display Unit 02522970-02 (Serial no. 2232-0618 and after) Added TRANSDUCER SETTING option in the EXTENSION MODE menu. Added KEEL DISTANCE option in the SYSTEM MENU3. Display Unit 02522970-03 Display Unit 02522970-04 Modified to conform with IEC 61162-1 Edition 2. Deleted KEEL DISTANCE option in the SYSTEM MENU3. Changed draft setting range from 0 to 30 m to -10 to 30 m. iiDownloaded from www.Manualslib.com manuals search engine CONTENTSFOREWORD.

• furuno navigational echo sounder fe-700 manual, furuno navigational echo sounder fe-700 manual, furuno navigational echo sounder fe-700 manual pdf, furuno navigational echo sounder fe-700 manual download, furuno navigational echo sounder fe-700 manual free, furuno navigational echo sounder fe-700 manual instructions.

Pub No. Software (Prog No.) Outline of changes in Operator’s manualFOREWORD. ivA Word to FE-700 Owners FeaturesYou can enlarge one of the data indications as. Strata display contains multiple colors dependingThe menu has several functions for advanced Noise. The picture advance speed determines how The interval for sampling data for theOutside this range the echoes from theThe table below provides simple troubleshooting procedures which you may follow to restore normal. All menu settings can be cleared to start afresh. MENU CLUTTER (AUTO, 0?16, 9) Default settingsNAV IN port (listener). Do not as yet turn on the FE-700. When loading of new software is completed, “Finish version up.ted” appears on the PC screen while the FE-700 shows normal picture. 11. Turn off the FE-700 and the PC to disconnect the cable. A1-2 Downloaded from www.Manualslib.com. The Switching Box and Matching Box connected to switching box are supplied optionally. The connection on TB7 must be changed depending on ship's mains, as follows. 1) When ship's main is 100 to 115 VAC; Black Orange White. Downloaded from www.Manualslib.com manuals search engine. Downloaded from www.Manualslib.com manuals search engine. Both 200 and 50 kHz RX circuits are located on the ANLG board and the one of RX circuits is selected by U9 in accordance with the System Menu 3 setting. The following display appears. The RANG and MODE control setting indications should be the same as actual control settings. The GAIN control setting indication should be among 0 to 235- 255. If some abnormal condition is obtained by controlling the RANGE and MODE knobs, the PANEL or MAIN board ( Gate array U10 ) is suspected to be defective. Factory settings are restored after this operation. 1. Turn on the power while pressing any key. Release the keys when the optional mode window appears. 2. Checksum is mandatory in this sentence.

The processor measures the time of pulses travelling between the seabed and transducer and displays the water depths in the graphical form or other forms. The transducers have a specific beam width with respect to their working frequency, 50 kHz or 200 kHz. The high frequency has a narrow beamwidth and is immune to aeration when the ship is going astern or in rough weather. The low frequency has a wide beamwidth and more powerful sounding capability. Page Count: 44 Nishinomiya 662-8580, JAPAN. Telephone:Printed in JapanThe transducer may become damaged. Only qualified personnelImmediately turn off the power at theDo not remove the label. If theContinued use of the equipment can causeContact a FURUNODo not disassemble or modify theFire, electrical shock or serious injury canName: Warning Label (1). Type: 86-003-1011-1. Code No.: 100-236-231. Immediately turn off the power at theContinued use of the equipment can causeContact a FURUNOAbout the TFT LCD. The TFT LCD is constructed using theMake sure no rain or water splash leaksFire or electrical shock can result if waterUse the proper fuse. Use of a wrong fuse can result in equipmentSoftware (Prog No.). Outline of changes in Operator’s manual. Publicized for. Display UnitDigital Depth IndicatorAdded TRANSDUCER SETTING option in the. EXTENSION MODE menu. Added KEEL DISTANCE option in the SYSTEM MENU3.FOREWORD. ivSYSTEM CONFIGURATION. vDeclaration of ConformityFeatures. Thank you for purchasing this navigational echoFURUNO has become synonymous with qualityThe FURUNO FE-700 is comprised of displayEcho sounding data isFilm Transistor) LCD display. Dedicated in the design and manufacture ofFURUNO Electric Company has gained anThe main features of the FE-700 are. Please carefully read and follow the safetyYour navigationalThis equipment is designed, produced andSystem.MSC.74(69) Annex 4 and ISO9875.The range scale and gain automaticallyNavigation Device. Personal Computer. Alarm Unit.

We are confident you will discover why FURUNO has become synonymous with quality and reliability. Dedicated in the design and manufacture of marine electronics equipment for half a century, FURUNO Electric Company has gained an unrivaled reputation as a world leader in the industry. This is the result of our technical excellence as well as our worldwide distribution and service network. Please carefully read and follow the safety information and operating and maintenance instructions set forth in this manual before attempting to operate the equipment and conduct any maintenance. Your navigational echo sounder will perform to the utmost of its ability only if it is operated and maintained in accordance with the correct procedures. FeaturesThe FURUNO FE-700 is comprised of display unit and transducer unit. Echo sounding data is displayed on the bright 6.5-inch color TFT (Thin Film Transistor) LCD display. The main features of the FE-700 are 1. Complies with the IMO and ISO standards MSC.74(69) Annex 4 and ISO9875. 2. Cost-effective; no paper, no consumables; high accuracy and high reliability - no rotating gears and belts as in the paper echo sounders 3. High-contrast 6.5-inch color LCD display featuring a wide viewing angle and adjustable brightness. 4. Wide variety of modes with never-get-lost default position. 5. Automatic function permits unattended adjustment of range, gain, and pulselength. The range scale and gain automatically change to display the bottom. 6. Position, course, speed, time are repeated from the external devices. 7. Alarms: shallow water, bottom lost, power drop This equipment is designed, produced and documented by FURUNO ELECTRIC CO., LTD., complying with ISO 9001 standards as certified by the Lloyds Register of Quality Assurance System. The display unit contains all basic electric circuits and logic processor. Electrical pulses are converted into acoustical energy in the transducer fitted on the ships hull.

Shallow depth alarm: 20 mNOTE: These parameters can be customized toThe Depth Below Surface mode provides aThe draft shouldWhen the DBS mode is selected, the messageIf the range scale for both the Contour and StrataIf they are not, theThe update of the contour data may take max.OS DATA mode. This display mode indicates own ship position. GPS-derived course and speed, and time andYou can read the data ofThere are 60 pages and the total memoryTRUE(true course) or. MAG (magnetic course) appears.There are two kinds of OS DATA displays: DATADATA 1 is the default setting, and it is shown inThe DATA 2 display is as below.Position-Fixing System such as GPSMENU display. The menu provides functions which normally doFor details see. Chapter 2.To select item. To set optionThis mode provides information about keys. Press desired key to obtain the correspondingTo set optionIf the depth goes out of the correct display area,Note: The AUTO MODE is cancelled wheneverAdjust the Range Control, and current rangeIn the AUTO mode, the range scale isSee section 1.9 forThe following windowThe automatic function automatically selects theTo set optionAdjust the GAIN Control so that a slight amountGenerally, use aAdjusting range isOthers marksThe range changes automatically to locate theRed infillRed infillRed infillYellow infillYellow infillThe gain is automatically adjusted to displayYellow infillMonochrome (amber) is the default setting. The. Strata display contains multiple colors dependingIt is necessary to set the draft to use the DBSThe shallow depth alarm sounds when theThe settingTo set option. The above window disappears in 10 seconds. The draft setting is displayed at the upper rightWhen the alarm is activated, the messageAt this time, the alarmAcknowledging the alarm. You can silence the alarm by pressing the MUTE. ALARM key. The message “SHALLOW DEPTH. ALARM” moves to upper side of the screen.Noise.

Ship’s mainsMB-504 (for 200B-8B)The display unitElectrical pulses are converted into acousticalThe processor measures the time of pulses travellingThe transducers have a specific beam width with respect to their working frequency, 50 kHz or 200 kHz. The high frequency has a narrow beamwidth and is immune to aeration when the ship is going astern or inRange. UnitDepth (m)Slow modeFast mode. Picture advance range. Range (m). Interval (min.)Gain, Range, Alarm, Draft, Brilliance, Dimmer, Color, AutoGain, range and clutter will be automatically adjusted.Shallow water (default 20 m), Bottom lost, Power dropIEC61162-1, current loop; 1 port. VTG: Ground track speed. ZDA: TimeSDDPT: Depth (m), Draft (m). SDDBT: Depth (ft, m, fa) below transducer. SDDBS: Depth (ft, m, fa) below sea surfaceOutputControl command for PC. Alarm (Depth, Power). Contact closure signal, normal open or normal close,Display Unit: IEC IPX5. Distribution Box: IEC IPX2. Matching Box: IEC IPX2IEC 60945 Ver.3Display UnitDistribution BoxMatching BoxTransducer. Submerged areaAll operation of the FE-700 is carried out with the controls on the front panel of the display unit. RotaryDisplay mode. Gain setting. Transducer in use ( when usingRange setting. AutoAlarmALARM 15mDepth alarm lineDepth unit. Screen. Explanation of depthSelf-test starts, showing the condition of theThe tone and brillianceOtherwise the tone and brilliance windowNAV position of the selector is recommendedThe unit ofYou can freelyNote: When two transducers are installed, makeDIM key also changes the illumination level.HISTORY, LOGBOOK, OS DATA, HELP, andDo not use this mode in shallowNAV modeThis mode provides a mix of Contour and StrataDefault is. Color. Amber. Range. Automatic range switching. Window: 15 minutes.

For AC input:The Digital Depth Indicator FE-720 uses one fuseA battery installed on a circuit board inside theNG appears at the self-test. When this happens,Dust or dirt on the display unit should beIf desired aLithium BatteryThe table below provides simple troubleshooting procedures which you may follow to restore normalLow power supply. Check the supply voltage. Fuse blown. Replace the fuse. Power cable damaged. Check the cable and repair. No echo sounding picture Transducer cable damaged. Irregular display. Loss of seabed display. Heavy noise. Surface noise. Repair the cable. Transducer cable connectionTighten the connections. Transmitter not working. Make sure the maximum output power isLow sensitivity. Increase the Gain by turning the GAIN controlLow reflectivity from seabed. Suspect muddy seabed. Marine life on transducer. Remove marine life from the transducer whenOut of range. Check the range scale setting. Air bubbles caused by goingThis is normal, it is not a sign of equipmentWrong installation place ofFind cause of noise. Relocate the transducer ifOther echo sounders nearby. If more than one echo sounder is working onAeration in near surface area. Not an equipment problem. Rough weather. Not an equipment problem.The diagnostic test checks the ROM, RAM, colorThe test pattern is used to check colorRelease the keys when the following displayBRILL key again to change the test patternColor barPosition of Range knob. Gain knob setting. Position of Mode knobAqua WHTIf NG appears, contact your dealer forEXTENSION MODE menu.POWER switch) one by one. If the key isThe RANGE and. MODE control setting indications should beGAIN control setting indication should beAll menu settings can be cleared to start afresh. All default menu settings are restored when theRelease the keys when the EXTENSION. MODE menu appears.Restore factory settings.Set data to default.MODE menu appears. Note: The setting for the items LANGUAGE and.

TRANSDUCER in the system menu is notTVG SELECT (DRAFT key x 3 times). BOTTOM LEVEL (ALARM key x 3 times). DISPLAY TEST (BRILL key x 3 times)Data transmission. Data is transmitted in serial asynchronous form in accordance with the standard referenced in 2.1 of. IEC 61162-1. The first bit is a start bit and is followed by data bits, least-significant-bit as illustratedThe following parameters are used. Baud rate: 4800. Stop bits: 1Data bitsNAV IN port (listener)Isolation: Optocoupler. Input Impedance: 560 ohms. NAV OUT portsNOTE2 For IEC applications the offset should always be appliedNOTE Positioning system Mode indicator. The Mode indicator field supplements the Status field. The Status field shall beThe GPS quality indicator shall not be a null field.NOTE 1 - Easterly variation(E) subtracts from true course. Westerly variation(W) adds to true course. NOTE 2 Positioning system Mode indicator. The Mode indicator field supplements the Status field. The Status field. The positioning system Mode indicatorNOTE Positioning system Mode indicator. The Mode indicator field supplements the Status field. The Status field. The positioning system Mode indicatorNOTE Positioning system Mode indicator. The positioning system Mode indicator field shall not be a null field. ZDA - Time and dateUnitCODE No.File Type Extension: pdf. PDF Version: 1.4. Linearized: Yes. Create Date: 2000:00:26 15:48:58Z. Modify Date: 2004:12:20 16:58:12-08:00. Page Count: 44. Page Mode: UseOutlines. Creation Date: 2000:00:26 15:48:58Z. Mod Date: 2004:12:20 16:58:12-08:00. Producer: Acrobat PDF File Format dobe for Macintosh. Author: obe. Metadata Date: 2004:12:20 16:58:12-08:00. Creator: obe. Has XFA: No. Modern navigation makes very high demands on the safety of crews and passengers on ships, as well as for the safe transportation of goods. For this modern ships compulsorily equipped with means of improving safety, such as mapping, radar, AIS, course guidance means, coordinates, speed measurement, etc.

The menu has several functions for advancedLight-blue dots may appear overall screen. ThisFor manual override, do the following:The higher theTo select item. To set optionInterference from other acoustic equipmentTo suppress interference, do the following:The higher the number the greater theNote that oversuppression will weaken theThe picture advance speed determines howThe interval for sampling data for the. LOGBOOK and HISTORY modes can be setThe default setting is 1 min.FAST or SLOW, respectively. The advanceRange (m)The future trend of the seabed depths can beTREND and appears at the top left corner. TheIn this example, the setting of INTERVAL isThe system menu 1 appears.The system menu should be set just afterThere are threeSelect other mode to exit.To set optionTo set option. Confirmation message “ARE YOU SURE?”OS DATA: Selects own ship data display mode. DATA 1 or DATA 2. DATA1 is the default setting. If a navigation device is not connected to the. FE-700, select DATA 2. DEPTH UNIT: Selects unit of depthDefault setting is meters. LANGUAGE: Currently English is only available.SPEED UNIT: Selects unit of speedDefault setting isTIME ADJUST: Selects internal clock or externalFor INTERNAL, set current day, month, year,COURSE: Selects heading reference; true orDefault setting isGPS ALARM: The audible alarm may beDefault setting is “ALARM” (alarm is enabled). Choose “OFF” if you do not need to be alertedNMEA format. Default setting is IEC “1:98”. When selecting the “1:98”, DPT has max. rangeOutputDBS (Ver.1.5). DPT (Ver.2.0). If EXTERNAL is selected, the screen changesALARM SOUND: Selects audio alarm soundTIME DIFFERENCE: Selects auto (UTC) orSetting area isNote: Ranges must be set in numerical order. For example, if range 1 is 5 m and range 3 is 20Trend: The trend index shows the probableThis chapter describes functions useful forAfter installing the equipment, set the transducerThe demonstration program shows how the. FE-700 works.EXTENSION MODE display appears.

XDR FORE field to 50 kHz or 200 kHz,XDR AFT field to 50 kHz or 200 kHz,To set optionOFF at step 4 above. Restart the display unitThere is no perceivable deterioration inIf the depth indication is unstable or the seabedEXTENSION MODE display. The TVG. SELECT window appears.If the level is set too low, the FE-700LEVEL display appears.The echo offset feature functions to compensateIf the onscreen echo level appears to be too weak or tooEXTENSION MODE display. The ECHO. OFFSET screen appears.The defaultOmnipadSelect the mode as below. The Digital Depth Indicator FE-720 is an optionalPress the POWER key. The unit beeps and startsTo turn off the unit,Depth below surface. Draft isSelecting language. The language in use on the screen is either. English or Japanese.The dimmer is controlled either with the DIM key,The method ofPANEL ONLY: The illumination of the controlEXT CONTROLLER: Illumination of controlThe DIM key isThe default is meter (m). EXT DISP: Not used.NG (No Good). If NG appears, contact yourAlarm. You can set turn alarm on or off. In the ON mode,FE-720 also.The default is ON.The display shows the following message toIf the alarm sounds, press any key to silence it.The diagnostic test checks ROM, RAM, keys and. LCD of the FE-720.The whole display brightens for 2 seconds thenTest repeats. CNT, whichYou can restore default settings to start operationDo not open the cover. There are no user-serviceable parts inside. Refer any repair work to a qualifiedIf a fuse blows, find the cause before replacing it. Use only designated fuses. Using the wrong fuseRegular maintenance is essential for goodItem. Action. Cable run. If conductors arePower cable,If loosened, tighten. Display unit ground. If corroded, clean. Ship's mains voltage. If out of rating, correctThree types of fuses are used in the distributionFor Display Unit:For Digital Depth Indicator: 0.5 A x 2 pcs.

What equipment is required to install on a ship on the requirements of PMPC Repair and adjustment of the excitation system of generators, setting up a parallel operation of generators. Fire safety systems, video surveillance systems, video for ships certified video system, Orlaco. Additional equipment, spare parts, additional power, radio equipment, navigation equipment. Vessels are supplied only by means that are established for each of them by appropriate norms and standards. For owners of private small boats (GIMS), both in our country and in Europe there are no strict rules for equipping the equipment. However, the vessel must be ready for navigation, the occurrence of various abnormal situations and ensure the safety of the crew. Also, there are COLREG-72 (International Rules of Preventing Collision at Sea ) - from which you can make a list of the minimum equipment required. Manufacturers offer many models: from expensive multifunctional to simple budget options. If you choose which equipment for a yacht, boat to buy. Even an inexpensive echo sounder will be useful not only for the fisherman, but for the boats and boats use combined chartplotters-echo sounders. For large cruise yachts, stylish functional solutions can be chosen to ensure the comfort and safety of the crew. Thank you for considering and purchasing FURUNO equipment. The PP-505 prints a depth graph or a log consisting of date, time, depth, draft, latitude, longitude and heading. View and Download Furuno FE-800 operator's manual online. Navigational Echo Sounder.. Furuno sonar user manual (41 pages). Marine Equipment Furuno FE-700. Echo sounders enable safe navigation by detecting a ship’s clearance (critical in shallow waters); as required by IMO standards on SOLAS Convention ships. Page 7: SYSTEM. FE-700 - read user manual online or download in PDF format. Pages in total: 44. Manualsbrain.com. en.. Furuno FE-700 User Manual. Download Like. Full screen Standard.

FURUNO will assume no responsibility for any damage associated with improper installation. Be sure that the power supply is compatible with the voltage rating of the equipment. Connection of an incorrect power supply can cause fire or equipment damage. The voltage rating of the equipment appears on the label above the power connector. User Manuals, Guides and Specifications for your Furuno MFD12 All in One Printer, Monitor. Database contains 4 Furuno MFD12 Manuals (available for free online viewing or downloading in PDF): User handbook manual, Installation manual, Operator's manual.Find the user manual and the help you need for the products you own at ManualsOnline. Features The FE-800 is a color navigation echo sounder which operates with 50 or 200 kHz frequency. The Furuno FE-700. Solve device problem. Videos (tutorials) Documents (manuals) Adorable Supply AYTP0340-2 FURUNO Thermal Printer Rolls FE-700. Check on Amazon. Office Manuals and free pdf instructions. Find the office and computer equipment manual you need at ManualsOnline.Find the office and computer equipment manual you need at ManualsOnline. Echo sounding data is displayed on the bright 6.5-inch color TFT (Thin Film Transistor) LCD display. The main features of the FE-700 are. 1. Complies with the IMO and ISO standards. MSC.74(69) Annex 4 and ISO9875. 2. Get Furuno FE-700 SONAR User Manual. Get all Furuno manuals! View and Download Furuno FE-700 operator's manual online.View and Download Furuno FE-700 installation manual online. Terminal Box DS-802 EGC Printer PP-505-FE GV-50B-6B Gate Valve GV-200B-8B Alarm Unit The Furuno FE700 is a result of over 50 years of Furuno's range of experience Compact Display Unit, Enabling Installation at the Conning Position; Memory FE-701. FE-702. Junction Box. JIS F8821-1. (Incl. rectifier). Matching Box. MB-502 (for 50 FE-700. Navigational Echo Sounder.The contents of this manual and equipment specifications are subject to change without 11.

3 Installation of Display unit and Distribution box: FE-700 ???????????? 11-6. 11.3.1 Mounting of Serial Printer vtLite Mobile UDI, MPDS. Max. 3m. User manuals Furuno are sorted by the product category. Consult FURUNO DEEPSEA's NX700 brochure on NauticExpo. User manual for the device Furuno FE-700. Online user manual database PRINTER PP-505 (For FE-700) i SAFETY INSTRUCTIONS WARNING Do not open the cover of the equipment. For over 50 years FURUNO Electric Company has enjoyed. Echo sounding data is displayed on the bright 6.5-inch color TFT (Thin Film Transistor) LCD display. The main features of the FE-700 are 1. Complies with the IMO and ISO standards MSC.74(69) Annex 4 and ISO9875. 2. Cost-effective; no paper, no consumables; high accuracy and high reliability - no rotating gears and belts as in the paper echo sounders 3. High-contrast 6.5-inch color LCD display featuring a wide viewing angle and adjustable brightness. 4. Wide variety of modes with never-get-lost default position. 5. Automatic function permits unattended adjustment of range, gain, and pulselength. The range scale and gain automatically change to display the bottom. 6. Position, course, speed, time are repeated from the external devices. 7. Alarms: shallow water, bottom lost, power drop Contents.

furuno mfdbb installation manual

Press the POWER key on the control unit to power the system. In a few minutes, the Installa- tion Wizard starts. MPU-001 can output two picture data to the displays connected to DVI 1 and DVI 2 ports. You can choose how the picture data is shown on two displays at here. Message mean 126992 System Time 127245 Rudder 127250 Vessel Heading 127251 Rate of Turn 127257. Smoothing When the receiving condition is unfavorable, the GPS fix may change, even if the vessel is dead in water. This change can be reduced by smoothing the raw GPS fixes. A setting between 000 to 999 is available. The higher setting the more smoothed the raw data, however too high a setting slows response time to change in latitude and longitude. All analog video equipment connected to the MFD are assigned respective nicknames (“PINP1 to 4”). If you don’t like the preassigned nickname, you can change it here. Use the cursor pad to select location. If you don’t like the preassigned nickname, you can change it here. Use the cursor pad to select location. Rotate the RotoKey to select character and push it to confirm selection. Repeat this operation to complete the nicknames. In case of multiple sensors for a nav data item, for example, several position-fixing equipment, choose the sensor to use, with the pull-down menu.Bow-stern: Set the distance from antenna unit to the transducer in bow-stern direction. When the transducer is located on the fore side, set a positive value. For Manual, set the high and low fre- quencies with the respective pull-down menus. For “FAR-2xx7”, steps 32 through 35 shown below cannot be done. Set these items on the FAR-2xx7 radar. DisplayEthernet Network. Page 7 Standard supply (MFDBB)Processor Unit MPU-001 - 1. Control Unit MCU-001 - 1 Choose. Page 8 External Buzzer OP03-136 000-086-443. Network Hub HUB-101 -. RJ45 Junction Box RJ45-to-RJ45 Straight RJ4-5CN-STR For LAN cable extensionPage 12 How to detach the front cover when flush mounted.

• furuno mfdbb installation manual, furuno mfdbb service manual, furuno mfdbb installation manual, furuno mfdbb installation manual pdf, furuno mfdbb installation manual download, furuno mfdbb installation manual 2017, furuno mfdbb installation manual instructions.

We have 5 Furuno MFDBB manuals available for free PDF download: Installation Manual, User Handbook Manual, Operator's Manual. Indicates a potentially hazardous situation which, if not avoided, WARNING could result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, CAUTION may result in minor or moderate injury. Remarks Processor Unit MPU-001 Control Unit MCU-001 Choose one.The former is the keyboard type, and the latter has an LCD display and keyboard.Repeat this procedure for the opposite side. Flush mounting 1. Prepare a cutout in the mounting location using the template sheet (supplied) for the DCU12. 2. Do this for all notches on the lower side of the unit. 3. Insert the remover to the space at the one side of the unit, and pull the remover to raise the panel slightly. This method requires the hanger. 1. Attach a liner to each side of the DCU12. 2. Fix the hanger by using self-tapping screws (supplied). 3. Screw knob bolts into the DCU12, set it to the hanger, and tighten the knob bolts. DCU12 Liner Hanger. Screw in two 6x30 self-tapping screws at upper fixing positions, leaving 5 mm protruding. Set the processor unit to the screws and screw in two self-tapping screws at lower positions. Tighten all screws. 4 pcs. Reattach the cover. The maximum cable length should be with- in 5 m. The num- ber on each DIP switch corresponds to port number. Binding screw M4x8, 6 pcs. This cable has an 18P connector. The DATA 2 port on the back of the processor unit. Solder wires of the FRUDD-18AFFM-L180 and the wires from sensors. The wire arrangement is shown below. Pin No. This cable has 3 m in length. If you need longer cable, use the op- tional joint box TL-CAT-012 and cable assy MOD-Z072 cable (2, 5 or 10 m). For DCU12, the con- nection of DVI cable is also necessary. To do this more easily the Installation Wizard is provided. It has all the items necessary for setting up your system. Language, DHCP server setting 1.

Page 41 Content of Waterproofing KitWhen you do not need waterproofing, use the cable fixing plate (supplied in standardWhen multiple MFDs are connected in a network, one MFD (and. Page 46 “Own Setting” Tab. Output) on which the Installation. Page 47 3.2. Master Setting and initial configurationPage 48 Note: A “No Master Warning window” can appear to inform you than a Master is not yetWhen the Radar and Sounder (if applicable). Page 50 NMEA2000 Data PGN that will be sent through the individual MFD’s NMEA2000 port. Note that in a multi-MFD network, each. Page 51 On the “Transmitted PGNs”, you have to click on “Stop” before expanding and viewingClick on the. Page 52 possible to filter any received NMEA0183 Data at any of these ports on individual. MFDs. And unlike the automatic recognition. Page 53 Example: If you connect a sensor such as a PB100 which provides Wind information butPage 54 from another source, you can disable it manually. Enter satellite number (max. 3Note: The Analog. Page 56 When an Engine(s) with a NMEA2000 Port is connected to an MFD in the network, the. Maximum Value of the. Page 57 new names on the left column, don’t forget to push the “Set” button (lower right) in orderThis tab allows you to select the Primary System Data. Source for various data types. Page 59 Name Description Example. Heading. Page 60 3.4.6. Sounder Configuration. Up to 2 Network Sounders can be connected on the NavNet3D network. NavNet3D is compatible with. Page 61 c) Motion Sensor and Motion Sensor Antenna Position. Page 62 d) Temperature Source (DFF3 only)The FCV1150 must have version 3.01 software or higher to work in a NN3D system. NavNet3D offers remote compatibility. Page 64 3.4.7. DRS (Radar) Configuration. Up to two DRS (or one DRS and one FAR21X7) can be connected on a. Page 65 - While the vessel is pointed at the target, turn the RotoKey or drag the Slide Bar.

To detach the front panel when the unit is flush mounted,. Page 13 4. Use your hands to detach the front panel from the lower side. The unit can be mounted on the deck, a desktop or on a bulkhead. Take. Page 15 1.2.2. MFDBB Processor Bulkhead Mounting. Mark four fixing holes positions on the bulkhead. Screw in two 6x30 self-tapping screws. Page 16 How to detach the front panel when flush mounted. To detach the front panel when the unit is flush mounted,. Page 17 2. Pull the tool to raise the panel slightlyPage 20 To connect the power cable, remove the Power Terminal cover. Unfasten the four panPage 23 Wiring InformationThis. Page 25 2.4.3. NMEA2000-0183 Data Conversion and NMEA2000 Bridging. NMEA0183 to NMEA2000 conversion. NMEA0183 sentences and NMEA2000 PGNs, which are used. Page 26 2.5. DRS (Radar) Connection. Up to two DRS (Digital Radar Sensors) can be connected to a NavNet3D network. Standalone Installation. Page 28 PSU Installation with the HUB101. When a PSU is used with the Furuno HUB101, connect the MFD(s) and Radar as. Page 29 Note: In case of multiple MFDs, connect the MFD set as “Master” directly to the PSU.A NN3D network is a system in which all components share information (navigationPage 32 Why use the Furuno HUB (HUB101). The Furuno HUB101 allows the Power Synchronization signal to reach the MFDs andIn addition to allow the Power Synchronization signal to pass, the Furuno HUB101 hasLeave these switches on OFF as. Page 35 The DFF3 follows the same concept (only the DIP switches change). AXIS212PTZ) Furuno recommends utilizing a separate POE Ethernet Switch. Page 37 2.8. External Monitors. IMPORTANT: Never connect or disconnect a DVI or VGA cable while the MFD isWhen two monitors are connected to the. Page 39 2.9. USB and Audio ConnectionPage 40 Arrows (up, down, left, right) SCROLLING PAD. Page Up RotoKey Counter Clockwise. Page Down RotoKey Clockwise. Enter Push on RotoKey.

Joint Box TL-CAT-012 000-167-140-10 For LAN cable extension. Junction Box FI-5002 000-010-765 For.Page 13 How to detach the front cover when flush mounted. To detach the front panel when the unit is flush mounted,. Page 14 4. Use your hands to detach the front panel from the lower side. The unit can be mounted on the deck, a desktop or on a bulkhead. Take. Page 16 1.2.2. MFDBB Processor Bulkhead Mounting. Page 17 How to detach the front panel when flush mounted. To detach the front panel when the unit is flush mounted,. Page 18 2. Pull the tool to raise the panel slightlyPage 21 To connect the power cable, remove the Power Terminal cover. Unfasten the four panThis. Page 26 2.4.3. NMEA2000-0183 Data Conversion and NMEA2000 Bridging. NMEA0183 sentences and NMEA2000 PGNs, which are used. Page 27 2.5. DRS (Radar) Connection. Note: This Ethernet coupler is not waterproof. Ethernet Cables that can be. Page 30 2.6. NetworkPage 31 two ports are NOT standard POE (Power over Ethernet) and POE devices cannot beThe Furuno HUB101 allows the Power Synchronization signal to reach the MFDs andSynchronization. DIP switches inside the processor unit. Page 34 be viewed only on the MFD where the source is connected. Additionally some IP. Camera can be controlled from NavNet3D. Page 35 The IP cameras need to have a specific assigned IP address (from 172.31.200.003Please refer to the Appendix. Page 36 2.8. External Monitors. Page 37 When Extended Mode is used the two screens need to be located in close proximity toHowever, the standard Mouse HID drivers will loadAudio In and Audio out are reserved for future DevelopmentWhen you do not need waterproofing, use the cable fixing plate (supplied in standardWhen multiple MFDs are connected in a network, one MFD (and only one) needs to. Page 45 “Own Setting” Tab. Output) on which the Installation. Page 46 -The system will search for sensors on the network.

MFDBB Keyboards are Ethernet network devices that need to be assigned (linked) to aThe Navnet 3D SystemID is a unique number assigned to a complete NN3D. Page 68 5. ChecklistMake sure that one (and only one) MFD is assign as a Master on any given. Page 69 As a reminder, Port 1 and Port 2 on the BB are ONLY used to connect the MFDBBPage 73 Additional Furuno Network Sensors can also be plugged directly to the HUB (using aThis installation is a dual MFD installation with Radar Overlay and ARPA functionalityNavpilot 500 Series Integration with NN3D MFDs is similar to Navnet. Page 76 In the above example, the MFDBB is configured for Extended Mode. The two monitorsThis installation is a simple dual radar installation (one DRS and. Page 78 6.2. Master ResetNote:. Page 79 5) When the MFDBB restarts, you can release the ESC key. After approximately 1-As of April 2009, the following MPEG-4 capable AXIS IP cameras are. Page 81 Right Click on “Local Area Connection” and select “Properties”. Fill the IP. Page 82 Note that the new IP can take up to 20 seconds to be recognized. A pop-up in the lowerThe following window should appear. Just double click on “IPUtility” to launch thePage 84 Note: If you use the same camera models in multiple locations, BE SURE to WRITE. DOWN the IP Camera serial. Page 85 It can take a while before the confirmation box appears. Click the “Close” button. The first IP camera has been. Page 86 Set the password of the IP camera to “pass” and click “OK”. Important: You cannot use another password and must. Page 87 At this point a camera image should appear. Now, click on Setup. Page 88 4) Optional: When using a PTZ (moving) camera, you can set-up the defaultPage 94 Oct.22'07 R.EsumiPage 109 The paper used in this manual. DisplayEthernet Network. Page 7 RJ45 Junction Box RJ45-to-RJ45 Straight RJ4-5CN-STR For Mast-Step or LAN cablePage 8 Standard supply (MFDBB)Processor Unit MPU-001 - 1. Page 9 Rectifier RU-1746B-2 -.

T he sy mbols used in th is rada r com ply w ith IEC 60 872- 1. WARNING No one navigational aid should be relied upon for the safety of vessel and crew. The navigator has the responsibility to check all aids available to confirm position. CAUTION The plotting accuracy and response of this auto plotter meets IMO standards.A t arget jus t acqu ired is m a rke d wi th a br ok en sq uare and a vect or a ppe ars with in 20 scans of the antenna to in d i cate the tar get's motion t r e nd. Within 60 scans, the initi al trackin g stage i s finished and th e target b e comes read y for sta ble tr acki ng. At th is point, the bro ke n square ma rk change s to a so lid circle. (Targets auto matical ly ac- quir ed a re distin guishe d from t hose ac quir ed ma nually. The ta rgets wh ich ar e ac- quir ed ma nually are di s p layed by bold s ymb ol.) Note 1: For successfu l acquisi tion, t he tar get t o be acquir ed s hould be wi thin 0.2 to 32 nm fr om own sh ip and n ot obscure d by sea o r r ai n cl utter. Note 2: Whe n the ca paci ty fo r manu al a cqu i si ti on is r eac h ed, a n appr opr i at e mes sage app ear s in th e text m essag e area. Canc el trac k i ng of non -thre atening targe ts if you wi sh t o acq uire ad dit iona l ta rget s ma nual ly. Note 3: Acquis ition is a lso possibl e with t h e ROTOkeys. S elect the ta rget to acqui re, long -pus h the Ro tary Kn ob, cho ose the Ta rget RO TOke y follow ed by t he Acqui re RO - TOkey. 4. 3 Clea ring a Lost T arg et On the radar or chart plotte r di sp la y, p la ce the curso r on the lost target and select the ROTOkeys Target and Cl e ar Lost. ARP A Sy mb o l M eanin g Imm edi ate ly aft er a cqui si t io n. Withi n 20 sca ns of the ante nna after acquisiti on, a vec tor app ears to s how a trend of move ment. Withi n 60 sca ns of the ante nna after acquisiti on, the plotting s ymbol changes to a sma l l circle, in dicating stead y-state tracki ng condition.

Lost tar get is indic ated by flas hing di amon d symb ol. The d iamond i s form ed from two e qual t r iang l e s. (flashing) Al l ta rgets ca n also be c anc elled fro m the R adar p op-up m enu. 1. For cancel ling indiv idual target, u se the Cu rsor pad to pu t the cu rsor on t he tar- get you wa nt to ca ncel tr acking. 2. Lo ng- pu sh the Rot ary K nob. 3. Select the T arget s ROTOkey and p u sh the Rot ary Knob. 4. Se lect th e Ca ncel or Can cel Al l ROTO key as ap pli ca ble an d pus h the Ro t ary Knob. With the ala rm ac ti ve, the ARP A cont in uousl y mo nit ors the pred ic te d range at t he Clo ses t Po int of Approach (CPA) a n d predicted time to CPA (TCPA ) of each tracked target to o wn sh ip. Wh en t he pre dicte d CPA o f an y targ et bec omes smal ler th an a preset CPA a larm rang e an d its pre dicted TCPA l ess th an a pre set TCP A alar m limit, the buzze r soun ds and a n appr o pri ate t e xt m ess age appe ar s. In addi ti on, the A RPA sy mbol ch ange s to a triangle and flashes togeth er with its vector. Prov ided that th is featur e is used corre ctly, it w ill help p revent the risk of colli s ion b y alert ing you to threate n in g t a rge ts.When a target tr ansits th e area, th e buzzer so u nd s and the targ et ca using t he warning is cle a rl y indi cated wi th a n inverte d flas hing t riangl e. You can silen ce the buzzer with the CANCE L key. 1. On the radar d isplay, p u sh th e right-but ton key to show t h e Radar pop-up menu. 2. Rota te the Rot ary Knob to choose Set Guard 1 or Set G u a rd 2, whi chever you want t o set, and p u sh the Ro tary K n ob. The point placement cursor appears at cursor locatio n. 3. Use the Cu rsorpa d t o p ut th e point pla cement cu rsor a t the to p le ft corne r for the gua rd zon e (Poin t A bel ow). 4. Press th e l eft-button key in t he cen ter of th e Curs orpad. 5.

Allow the system to fully performPage 47 Note: Power Synchronization requires a HUB101 and proper hardware configuration. Please refer to 2.6.2. Power Synchronization paragraph for more Information. Page 48 External Monitor for more information on Clone and Extended mode when two monitorsPage 49 Click on the “Next” button to continue the configuration.Page 50 IMPORTANT!: After configuring any NMEA0183 Input Port Sensors on the Master. MFD, you must REPEAT THIS PROCEDURE at any other. Page 51 the raw GPS fixes. A setting between 000 to 999 is available. The higherPage 52 is available again or the alarm is acknowledged (by key operation). Off:Page 53 Note: The currently accepted engine data is as follows:You can assign names to each connected Analog and IP Camera. These names will beSelect the “Data. Page 57 Water Depth Choose the depth sensor to Smart sensor (NMEAUp to 2 Network sounders can be connected on the NavNet3D network. DFF1 and DFF3. Select. Page 59 Up-down: Set the distance from the transducer to the antenna unit in theUp to two DRS can be connected on the NavNet3D network.Click on “Exit”. This will close the Installation Wizard and. Radar Installation. MFDBB Keyboards are Ethernet network devices that need to be assigned (linked) to aThe Navnet 3D SystemID is a unique number assigned to a complete NN3D. Page 65 5. AppendixPage 67 Additional Furuno Network Sensors can also be plugged directly to the HUB (using aThis installation is a dual MFD installation with Radar Overlay and ARPA functionalityNavpilot 500 Series Integration with NN3D MFDs is similar to Navnet. Page 70 In this example, the MFDBB is configured for Extended Mode. The two monitors showIn order to view and control Axis IP Cameras from an MFD. Page 72 Right Click on “Local Area Connection” and select “Properties”. Fill the IP. Page 73 Note that the new IP can take up to 20 seconds to be recognized.

Just double click on “IPUtility” to launch thePage 75 The AXIS IP utility will detect all the IP cameras connected on the network. Note: If you use the same. Page 76 You will need to restart (power OFF and ON) the camera after the address is changed.The cameras need to be configured using a Internet Explorer. Enter the IP address of. Page 78 When the webpage loads, pay attention to the top of the page to authorize thePage 80 When the view is correctly set up, type “Home” for the Current position and select “UsePage 86 Oct.22'07 R.EsumiPage 101 The paper used in this manual. It is in excellent, working, condition. We u pdated the software to V2.13 for optimal performance. We know that if you’re looking at this listing, you want to be up and running today. Do not assume any additional items will be included in your shipment.There are times a display is used ONLY to show the item being sold is functional and working properly. In this case these displays ARE NOT included, this will be stated in our descriptions. If you have ANY questions feel free to send a message or call Max Marine Electronics Inc, Pompano Beach, Florida. We always want to be transparent with our customers and fully disclose any information regarding the products we sell. A solution-minded staff, well versed in product functionality, compatibility and repair, is key to your satisfaction. Please check your inbox, and if you can’t find it, check your spam folder to make sure it didn't end up there. Please also check your spam folder. For more detailed information see the Operator's Manual. Turn on the interference rejector when interference appears on the screen. Targets ca n be acqui red manu ally or automat icall y. All 30 t argets can be ac- quir ed manua lly wh en th e ARP A ac quisit ion ar ea is in activ e. Wit h the acqu isition area th at tot al i s eq ual ly divi ded b etwe e n ma nu al and a u to acqui si tio n. AR PA re quire s spee d and hea ding d ata.

U se the C ur sorp ad t o dr ag t he po int pla ce m e nt curs or t o t h e bo tto m r ight c orne r (Poi nt B be low) f or the gu ard z one an d pus h t he l ef t-b utton key. To erase the guard z one ( and ret urn to f ull manual a c quisition), put the cursor on a li ne of t h e gua rd zo ne and pu sh the right -button k ey t o sho w th e Guar d Zone pop- up. (The lin e becomes thicke r if cor rectly selecte d.) Rotate the Rotary Knob to choose Cl ear Guar d and pu sh t he Ro ta ry Knob. P oint A P oint B Drag cursor to P oint B Acquisition Area A ne w dot i s ad ded ever y mi nu te ( or a t ot her pr ese t t ime i nt er va l s) un ti l th e pre set num ber is reache d. If a targ et cha nges it s spe ed, the spac ing be twee n dots will b e un- even. If a ta r get ch anges its co u rse, its p lotted co u rse will not b e a str aight line. Se lectin g T rac k Histo ry Plo ttin g Int erval 1. Pr ess th e ME NU key to o p en the menu. 2. Op en th e T ar get s menu. 3. Sele ct Track H istory Le ngth and pu s h th e Ro t ary Kn ob. 4. Rota te the Rot ary Knob to select p l ot in terval desir ed. 5. Pr ess th e ME NU key to cl ose the menu. Sh owin g, Hi ding the T r ack Hi stor y Di splay On the radar d isplay or t he chart plotter d isp l ay, long-push th e Rotar y Knob t o show the R O TOkeys. Choose t he Targe ts ROTOkey f ollowed by th e Tr ack ROTOkey. Push the Rota ry Knob to alte r nat e ly s how and hide the tra ck histo r y displ ay. I t also bro adcasts d etails of th e cu r re n t navigati on syst em: speed, co urse, r ate of tu rn, desti n ati on, and ETA. Th e tr ansponder re ceives t h is sa me information from oth er sh ips, an d display s it on ra dar an d chart p lotter d isplay s. CO G is s hown with a br oken l i n e exten ding from the cente r of the triang le. Ta r g e t selected Blue A target s ele cted to d i splay its data is m arke d with a broken rectangl e.

Dan gerous target R ed An A IS target whose C P A and TCP A are les s than those values s et on the CP A Se ttings dial og box or the proxi mity alar m range i s cons i der ed a dan gerou s tar- get, on collis ion cour se with own shi p. A da ngero us target is colored pink w hen s elected to fi nd its d at a. Los t target Black or whi t e If no signal is receiv ed from an AIS t arg et for 1 0 minu tes it is de clared a lost t ar get. If no sign al i s recei v ed fo r anot her 10 minutes the lost tar get symbo l is a utomatic ally eras ed. ROT line If the screen becomes too clutter ed with AIS target s, you may wish to set an ac quisit ion ra nge in or der les sen th e numbe r of AIS tar gets on the sc reen. On ly tho se targ ets w ithin the range s elect ed will be mon it o red. 1. Press th e MENU key to o pen th e menu. 2. Op en th e T ar get s menu. 3. Sele ct Sho w T a rget Ra nge an d push t he Rotar yKn ob. 4. Se lect a ra nge and pus h the Rot ary Kn ob. 5. Press th e MENU key to cl ose the menu. A ne w dot i s ad ded ever y mi nu te ( or a t ot her pr ese t t ime i nt er va l s) un ti l th e pre set num ber is reache d. If a targ et cha nges it s spe ed, the spac ing be twee n dots will b e un- even. Se lectin g T rac k Histo ry Plo ttin g Int erval 1. Pr ess th e ME NU key to o p en the menu. 2. Op en th e T ar get s menu. 3. Sele ct Track H istory Le ngth and pu s h th e RotaryK nob. 4. Rota te the Rot ary Knob to select p l ot in terval desir ed. 5. Pr ess th e ME NU key to cl ose the menu. Push the Rota ry Knob to alte r nat e ly s how and hide the tra ck histo r y displ ay. W hen t h e ca p a city f or poi nts or ro utes is r eac he d, a new p oin t or rou te canno t be ente red un less an u nnec - essary o ne is er a se d. For those r easons, you may wi sh to save poin ts and ro u tes t o an SD card. Foll o w th e on - scr een i n str uct ion s. Save Tr acks The hard disk of this uni t holds 12,000 points of tracks.

When that to tal is reac hed, the oldest track i s deleted to mak e room for the late st. If you require the tr ack save i t to an SD card. Select S ave Track s and fo llow th e on- screen instr uctions. I t may be useful to have sev- eral different sets of u ser setups to se t u p t he system acco rding to expecte d usage. For exa m p le, you may wa nt to ha ve a use r setup wi th se ttin gs suite d to fi shing and one for c r u ising. S e le ct Save User Setu p and follow th e o n-screen i nstruction s. Lo adin g Dat a L oad Poin ts and Rou tes Use the L oad Poi nts and Routes funct ion to load points and r outes sa ved to an S D card. P oints and routes l oaded from an S D card a re di splayed to gether wit h current points and rou tes. In ca se of ident ical n ames, the p o i nt or route data i s writte n o ver with the matching d a ta on t h e SD ca rd. L oad Trac ks You can l oad past tracks on the displ ay. This i s u s eful when you want to cr eated a route using pa st tracks. S e lect Load Tra cks and fo llow t h e o n -scr e en instructio ns. Loa d Use r Se tup Select Load User Setup to l oa d u ser set tings i nto the HD. The current u s er setti ngs are wr itten ove r. Select Load User Setup and foll ow th e on-screen instr uction s. Delet ing File s Select Delete Fi l e a n d fo llow on-sc reen in structi ons to d elete fil es. Mo ving Files Select Move File to copy MP3 f iles, e tc. Mana ge Char t Ca t alog Use this fe ature to d e lete and transfer ( t o SD card) t he charts st o r ed on t he hard di sk. Re ques t U p da te Fi le Th is fea ture reque sts th e app licatio n vers ion no s. of al l NavN et eq uip ment in the N av- Net netwo rk. Loa d Update Fi le Select this i tem to update a ll N a vNet a pplic ations i n t he NavNet network. Once you h ave set the va lu e s, t hey are r eta ined in t he processor, e v e n when th e sys- tem is po wered off.Three pre- set amounts a re avail able: basic, stand ard and f ull.

A cust om settin g is als o avail able, an d it a llows yo u to select t h e ROTOkeys to mak e availa ble. Th e ROTO keys availab le with th e basi c, stand ard an d full sets in the ch art plot ter and radar mo des are sh own in the tabl e s o n th e n ext s everal pages. No No Y es Acqu i re Acq uire targ et for A RP A. No No Y es C ancel Can cel trackin g o n se lected ARP A t arget. No No Y es C ancel All Can c el t racking on all A RP A targe ts. No N o Y es Cl ea r Los t Cl ear lost AR P A target. N o Ye s Ye s Points Point processing No Y es Y es List Show Points li st. No Y es Y es C r eate En ter a poi nt. N o Ye s Ye s Ro utes Route processing No Y es Y es Ne w Cr eat e ne w ro ut e. No Y es Y es L ist Show Routes list. No Y es Y es XTE Ini t Restart XTE. No Y es Y es S to p S top fo llowing a rout e. No Y es Y es Reve rs e Reverse ro u te fol lowing dir ect ion. N o Ye s Ye s EBL EB L proc essing No Y es Y e s EBL1 Activat e EBL1. No N o Y e s EBL2 Activate EBL2. No Y es Y e s Cl ear1 Deac tivate EBL1. No No Y e s Clear 2 Deactiv ate E BL2. N o Ye s Ye s VRM V RM pr oc ess ing No Y es Y e s VRM1 Activate VRM1. No N o Y e s VRM 2 Activate VRM 2. No Y es Y e s Cl ear1 Deac tivate VRM1. No No Y e s Clear 2 Deactiv ate VR M2. No No Y e s Guard Gu ard Z one pr oce ssi ng No No Y e s Zo ne1 Ena ble guar d zone 1. No No Y e s Zo ne2 Ena ble guar d zone 2. No No Y e s Clear 1 Disab le gu ard zone 1. No No Y e s Clear 2 Disab le gu ard zone 2. No No Y e s Wa t c h m a n E nable, d isable w atchm an. No No Y e s Ac quire Acqu ire target for AR P A. No No Y e s Can cel Cancel tracking on s elec ted A R P A target. No No Y e s Can cel Al l Canc el tracki ng on a l l AR P A targets. No No Y e s Clear Los t C l ear lost AR P A t a rget. No No Y e s Entertai n En able, di sab le ente rt ainm ent. Sho w th e ite m’ s status box in gr een to tu r n it on, or gray to turn it off. 6. Press th e MENU key to cl ose the menu.

To enab l e th e cus tom R OTOke ys, set Rota ry Knob in the Se ttings sub m enu of th e My NavNet to Custom. This sec tion shows you h ow to further customize the boxes, f r o m the NavDa ta menu. 1. Pres s th e ME NU key to o p e n the menu. 2. Open the NavDa ta me nu. Sel ecti ng Nav Data cate gory to use f or each NavD at a b ox Select the navda ta c ategory to assi gn to e ach NavDat a box. Th e choices a re cur- so r, ow n sh ip, GoT o, F ishing, Engin e, Sailin g and T ar get 3. Use the R ot ary Knob t o choos e F I rst N avDa ta Box and push t he R otary Kn ob. 4. Select the catego ry of Na vDa t a to use and push the Rot a r y Knob. 5. Set the 2 nd, 3rd an d 4th N avD ata boxe s simi larly. Abbrev ations key P os: P osition COG: Course Over Ground CP A: Closest P oint of Approach SOG: Speed Over Ground SST: Sea Surf ace T emperature TCP A: Time to Closest P oint of Approac h TTG: Time T o Go (to a point) Sel ecti ng pe rc ent age of trans pa ren cy Y ou can se lect how transp arent to make the data b oxes. The higher t he percent- age the g rea ter the tra nsp ar enc y. 9. Select Tr ansp a r ency an d push t he Rota ry Knob. 10. Rotat e the Ro t ary K nob to s et the pe rcentag e des ired an d push t he Rotary K nob. Select NavData Display and p ush the Rota ry Knob to turn th e NavDat a b oxes o n and of f altern ately. If th e default arrangement is not to your li king you ca n change it as f ollows: 1. Press th e DISP key to show the di splay se lection screen. 2. Use the Ro tary K n ob to select the di splay you wa nt to r earr ange and th en long - pus h th e Ro tar y Kn ob. 3. Rota te the Ro t ar y Knob to se lect t h e di splay sp lit yo u wa nt to use wi th the d isplay sp lit sele ctor a t the left sid e of th e scr een a nd pu s h the R ot ary Kno b. Fo r exa mple, ch oose th e thre e-split s creen. Y ou r s creen shou ld now look so methi ng like th e one bel ow. 4. A green recta n g le is circumscr ibin g the acti ve selecti on.

furuno mfdbb manual

com and register to get the most from your NavNet 3D system. Some of the topics are how to turn on the equipment and an introduction to the main displays. Other items that have a label, for example, the soft controls related to the RotoKey, are shown in brackets in normal typeface. You rotate the RotoKey to select a soft control then push the RotoKey to do the function marked on the soft control.When you are asked to open a menu, the name of the menu and sub menu are given, separated by a hyphen.Information is transferred between MFDs through a high-speed Ethernet. The MFDs can be in three states. The screen is on and the user can operate the MFD. The MFD operates and transfers information across the network. The MFD in this state can control and transfer information with other MFDs on the network. The MFD uses low current in this state. The MFD does not use any current in this state. If you operate the power switch on an MFD that is in the sleep mode, the MFD turns on. If you press the power switch on an MFD more than three seconds, all MFDs in the network are turned OFF. To restore power synchronization, first turn off all MFDs. To un-sleep the equipment, push the power key until the picture appears. The top label is the main function and the bottom label, the secondary function. Short-push to access the main function and long-push (approximately three seconds) to access the secondary function. For wrong operation, three beeps sound.Controls are illuminated for nighttime use. To turn the power OFF, press and hold the same key.The start-up screen appears with the progress bar (at the bottom of the screen). The progress bar moves to the right as the procedure continues. Approximately 90 seconds after you apply the power, the Navigation Warning message appears. Read the message then push the RotoKey to begin operation. (There is an additional message if your NavNet has the Sirius weather feature.) Otherwise, no video signal is output.

• furuno mfdbb manual, furuno mfdbb installation manual, furuno mfdbb service manual, furuno mfdbb manual, furuno mfdbb manual pdf, furuno mfdbb manual download, furuno mfdbb manuals, furuno mfdbb manual instructions.

We have 5 Furuno MFDBB manuals available for free PDF download: Installation Manual, User Handbook Manual, Operator's Manual. Please check your inbox, and if you can’t find it, check your spam folder to make sure it didn't end up there. Please also check your spam folder. Wrong operation or maintenance can cancel the warranty or cause injury. The screens you see depend on your system configuration and equipment settings. For disposal in the USA, see the homepage of the Electronics Industries Alliance ( ) for the correct method of disposal. To see if your product has a battery, see the chapter on Maintenance. Follow the instructions below if a battery is used.Take the used The number of symbols can increase when the other countries make their own recycle symbols in the future. This energy can be dangerous to you, especially your eyes. Do not look at the radiator or near the antenna when the antenna is rotating. Do not remove any label. If a label is missing or damaged, contact a FURUNO agent or dealer about replacement. Confirm that TX has stopped before opening scanner. We are confident you will see why the FURUNO name has become synonymous with quality and reliability. This dedication to excellence is furthered by our extensive global network of agents and dealers. However, no machine can perform its intended function unless properly installed and maintained. Please carefully read and follow the operation and maintenance procedures set forth in this manual. Information is transferred between NavNet 3D units through a lightning fast Ethernet. The plug and play format allows expansion and you can connect a maximum of 10 NavNet devices. Auto mode automatically adjusts range, gain and clutter according to purpose, fishing or cruising. Registration is easy and free. When you register, you get a personalized page where you can access the various benefits. These benefits include online software and chart updates and personalized news services. Go to www.navnet.

These echoes can be from separate fish, a school of fish, or the bottom. Depth to the bottom is indicated always, provided the gain is set correctly. The high frequency has a narrow beam that helps you inspect fish. Weaker echoes appear in colors near the bottom of the scale, and stronger echoes appear in colors near the top. You can also move the cursor from one corner to the opposite corner when you press any two locations together on the CursorPad. The cursor position and range and bearing from your vessel to the cursor position are alternately shown in the cursor data box at the upper right corner of the screen. This bar shows operation information with messages, and sensor state with the icons. The color of the bar changes according to the types of messages as shown below. An icon is in “motion” if the related sensor is active. An icon is not moving and has an X if a sensor is not active or the sensor is not operating correctly. (The radar and fish finder icons are not in motion when the radar or fish finder is in stand-by.) The GPS, radar and fish finder icons have a “shortcut” function, Click those icons to get the shortcuts shown in the table. A long-push displays all of the soft controls for the current mode. To erase the soft controls manually, press the CANCEL key. Push the RotoKey to access the functions. The icon is colored green when the item is ON and gray when the item is OFF. Rotate the RotoKey to select a soft control. Push the RotoKey to do the function shown on the selected soft control. To display a pop-up menu, select an object and hit the rightclick button. A pop-up can also be shown if you push the same button in any position on the active display. The illustration below shows the Radar pop-up menu. For a status icon, push the RotoKey to show the status icon in green to activate the function, or gray to deactivate the function. For items that do not have a status icon, push the RotoKey to go to the next level.

Wait until the start-up is completed before you turn the power OFF. To adjust the brilliance of a commercial monitor, see the operation manual of the monitor. The current level is shown on the bar. A thick red line is around the active display. Set and remove SD cards as shown below. The recommended capacity for the cards is 128 MB to 2 GB. (The Secure Digital High Capacity (SDHC) SD cards cannot be used.) If the card becomes damaged, format the card with a formatting program that is compatible with the specifications of the SD card. The SD Memory Card Formatting Software made by Panasonic is an example. Wrong use can damage the card and destroy its contents. Do not use metal instruments (like tweezers) to remove the card. Remove the water with a dry cloth completely and then open the cover. A vector chart for the US coastline (with Alaska and Hawaii) is provided also. The plotter section has functions to enter way points, and create and plan routes. Your position is marked on the screen with the boat icon. You can change the shape of the icon to match that of your vessel. You can move, delete and edit the way points and routes from a pop-up menu. The radar detects the position and movement of objects. Objects are shown on the radar display at their measured distances and bearings in intensities according to echo strength. The relative motion display shows other vessels movement relative to your vessel. The true motion display shows your vessel and other objects in motion according to their true courses and speeds. A guard zone tells you when the radar targets are in the area you indicate. The trail of targets can be shown in afterglow to monitor their movements. This display lets you watch on both short and long ranges at the same time. Cursor looks like this when in motion. Echoes are scrolled across the screen from the right position to the left position. The number of minutes an echo is displayed on the screen is controlled by the picture advance speed.

The Processor Unit MPU-001 can output two picture data to the displays connected to its DVI1 and DVI2 ports. You can select how to show the pictures on the two displays: the same picture on both displays or picture split across both displays. This is set at the installation. The cursor moves Below are the steps to start fax operation. The fax display is available only in the full-screen display. A sample display is shown below. Refer to the Operator’s Manual of the FAX-30 for operation information. When another NavNet display accesses the FAX-30, control of the FAX-30 is given to that display after the picture is stopped completely. This sequence takes approximately one minute. To access the main menu of the transponder, do the following: A hexagon-shaped marker marks a ship’s position. The marker is color-coded according to the type of DSC message sent, red for distress and dark-blue for non-distress. Position information is not updated. Push the RotoKey to show or hide the DSC message information. For MMSI no., position, and type of DSC message, push the left-click button. To help you identify a ship quickly on the chart plotter and radar displays, you can replace the MMSI no.Up to 20 alphanumeric characters can be used. Rotate the RotoKey to select the MMSI no. to edit. Continue from step 2 in “How to add an MMSI no.When the list becomes full, no new MMSI no.These MMSI nos. and DSC markers are deleted: A vector chart for the US coastline (Alaska and Hawaii included) is provided also. To use this chart plotter as a navigational aid, have electronic charts (stored in the hard disk) for the area you navigate. Contact your dealer about charts for your area.Raster charts have information like notes, source diagrams, tidal diamonds, horizontal and vertical datum, etc. These charts are made according to the International Hydrographic Organization (IHO). These are available for US waters. The selected chart scale appears at the top lefthand position on the screen.

You can select the data to display in the boxes, and show or hide the boxes as necessary. A box can show one or more data. The data that you can show depends on your system configuration. You can show a maximum of five boxes, four at the bottom-left corner and the cursor data box at the top-right corner. The no. 4 data box only appears if a destination is set. Hit the right-click button to show the Data Box pop-up menu. The number of menus depends on equipment connected. To show the menu, press the The Alarm log automatically appears if an alarm condition is broken. Rotate the RotoKey to the right to move the menu bar toward the bottom. Rotate the RotoKey to the left to move the menu bar toward the top. The back- Rotate the RotoKey to select a sub menu then push the key to validate selection. Rotate the key right for selection in the left-to-right direction. Rotate the key left for selection in the opposite direction. The active tab is larger than other tabs. This occurrence indicates that you can operate the menu selected. Do one of the following depending on type of menu item selected Push the Ro- Rotate the You can select a language to use as follows: Use the RotoKey to select Yes. You need either position data from a navigation device, or heading and speed data to calculate position by dead reckoning. You activate the MOB from the chart plotter display and MOB position is marked on both the chart plotter and radar displays. Then, the following occurs: This line is the course to take to go to the MOB position. Simple information includes point name (MOB), and range and bearing to the MOB position. Detailed information includes simple information plus the information shown below. For detailed information, put the cursor on the MOB mark and hit the left-click button. Put the cursor on the MOB mark and press the right-click button to show the Points pop-up menu.

Furuno Navnet Manuals. Furuno 1724C 1734C GD1720C Installation Manual. Furuno IME35430E vx2 (7.55 Mb) Furuno MFDBB (1.71 Mb) Furuno MFD view of connectors. User Manuals, Guides and Specifications for your Furuno FCV-600L Fish Finder, Marine Equipment. Database contains 2 Furuno FCV-600L Manuals (available for free online viewing or downloading in PDF): Operator's manual, Installation manual. Furuno MFDBB NavNet 3D Black Box System The Furuno MFDBB is a full functioning navigation system designed to be viewed on a 12, 15 or 17 inch marine display. Find the user manual and the help you need for the products you own at ManualsOnline.Download Telephone User's Manual of Furuno FS-1562-25 for free. Manuals and User Guides for Furuno FCV-588. On this page you can completely free to download User's Manual Furuno GPS Navigator GP-50 MARK-2. PDF User's Manual has 90 pages and its size is 2.47 Mb. Read online Fish Finder Furuno GPS Navigator GP-50 MARK-2 User's Manual View and Download Furuno NavNet 3D MFDBB operator's manual online. Multi Function Display. NavNet 3D MFDBB Monitor pdf manual download. View and Download Furuno MFD8 operator's manual online.Also for: Mfdbb, Mfd12. Browse the Furuno product catalog for current and previous products.. UHD Radar, and Network Fish Finder can be added.). AUDIO SEAL MFDBB SEALING KIT. Marine manuals and free pdf instructions. Find the marine product manual you need at ManualsOnline. Furuno sells Fish Finders for all varieties of boat types and styles. From small recreational boats to commercial trawlers, there's a Furuno Fish Finder that meets your needs. Below is a brief comparison of Furuno Fish Finder offerings to help determine which works best for your needs. The fish size shown on the screen can be different from the true size. If the size is wrong, add an offset to the measured value to get a more.

Fish Finder,A multi-station integrated navigation network, NavNet TZtouch lets you build your navigation system according to your needs. Garmin vivosmart hr user manual View and Download Furuno CH-270 service manual online. Furuno CA-270 Manual - Color searchlight sonar CH-270 Sonar pdf manual download. Follow the instructions below if a battery is used. 7.4 Manual Fish Finder Operation. Congratulations on your choice of the MFDBB Multi Function Display. International customers please allow up to 6 weeks for delivery. If you have ANY questions please always feel free to send an eBay message or call Max Marine Electronics Inc, Pompano Beach, Florida for help, assistance or more detailed information. We always want to be transparent with our customers and fully disclose any information regarding the products we sell. A solution-minded staff, well versed in product functionality, compatibility and repair, is key to your satisfaction. Page Count: 1 This mode is used when there are two stations at different locations on the boat. Both stations will display identical displays at all times. Two monitors, one MCU001 keyboard and one MFDBB processor. This mode is used when two monitors are needed at the same station, but with different displays and information on each. The cursor can be moved back and forth between the monitors to individually control the features of each. Press arrow or diagonal to scroll chart, radar picture. Select orientation. Confirm selection. Head Up Course Up North Up Confirm selection. North Up Course Up Long push Next The purpose of this Operator’s Guide is to provide basic operating procedures for. Page 2 Chart Plotter. Placing a point at cursor location Going to cursor positionToggling TX, Adjusting gain, and rain and sea cluttersYour fish finder can be operated automatically or manually. In automatic operation, gain, clutter. TVG,.

When you operate a RANGE key, the chart scale changes to the next available setting. Push RANGE IN to decrease chart distance, then push RANGE OUT to increase the chart distance. The current chart scale is shown in the chart scale indication at the top-left corner. The scale suitability indicator helps you select an acceptable chart scale. The background of the indicator is white if the scale is acceptable, and red if the scale acceptable. Press the right-click button to show the Range pop-up menu, shown below. Rotate the RotoKey to select a range then push the key to validate your selection. Another method is to put the cursor on the orientation mode icon at the top-left position then push the left-click button. The heading data from a compass is required. When the heading changes, the boat icon remains fixed, and the chart picture rotates according to heading. When your heading changes, the boat icon moves according to heading. This mode is for long-range navigation. The boat icon moves with the heading. If you select a new course, the picture resets to display the new course at the top of the screen. Use the RotoKey to get an aerial view or underwater view 3D display. Please check your inbox, and if you can’t find it, check your spam folder to make sure it didn't end up there. Please also check your spam folder. For more detailed information see the Operator's Manual. Turn on the interference rejector when interference appears on the screen. A special “key-push” sequence is used to cycle through the “Linking Codes” for all the MFDBB processor unit(s). You can release the button at this time. The keyboard will now control the MFDBB. Disconnect and reconnect the keyboard from the processor unit and try again. Repeat the process (as explained above) until two beeps are heard.

If the MFDBB does not respond (This means that the keyboard is actually linked to another processor unit on the network), repeat the process until the keyboard controls the correct MFDBB processor. The lack of an instruction or false information given to customer shall constitute grounds to apply for a complaint because of nonconformity of goods with the contract. In accordance with the law, a customer can receive an instruction in non-paper form; lately graphic and electronic forms of the manuals, as well as instructional videos have been majorly used. A necessary precondition for this is the unmistakable, legible character of an instruction. Therefore, in an instruction of Furuno MFDBB one could find a process description. An instruction's purpose is to teach, to ease the start-up and an item's use or performance of certain activities.A good user manual introduces us to a number of additional functionalities of the purchased item, and also helps us to avoid the formation of most of the defects. An instruction contains a number of clues concerning respective functionalities, safety rules, maintenance methods (what means should be used), eventual defects of Furuno MFDBB, and methods of problem resolution. Eventually, when one still can't find the answer to his problems, he will be directed to the Furuno service. Lately animated manuals and instructional videos are quite popular among customers. These kinds of user manuals are effective; they assure that a customer will familiarize himself with the whole material, and won't skip complicated, technical information of Furuno MFDBB. After a successful purchase of an item one should find a moment and get to know with every part of an instruction. Currently the manuals are carefully prearranged and translated, so they could be fully understood by its users. The manuals will serve as an informational aid. Looking for an owners manual for a fisher 1710 boat I just. It will power up yellow lights on buttons but whatever.

Page 5 Le present guide d’utilisation a pour objectif d’expliquer les procedures d’utilisation de base de cetPage 6 Traceur de carte. Placement d'un point a Aller a la position du curseurPermutation TX, Reglage du gain et des echos de la pluie et des. STBY vaguesSelection du mode de fonctionnement. Votre SONDEUR peut fonctionner automatiquement ou manuellement. En mode automatique,Page 9 PANTALLA MULTIFUNCIONEl proposito de esta Guia del operador es proporcionar los procedimientos basicos de. Page 10 Ploter de la carta. Ubicacion de un punto en la Ir a la posicion del cursorPage 11 Radar. Conmutar TX, Ajuste de ganancia y de ecos parasitos de mar y lluviaSonda puede funcionar en modo automatico o manual. En modo automatico se ajustan la. For disposal in the USA, refer to the Electronics Industries AllianceWarning, Caution. Prohibitive ActionDo not open the equipment. Only qualified personnel should workMandatory ActionSerious injury or death can result if someoneTurn off the power immediately at theContinued use of the equipment can causeDo not subject the units other than theFire or electrical shock can result if waterAlways confirm position against allDo not disassemble or modify theFire or electrical shock can result if theA radar is useful as an anti-collision aid. However, it does not remove the requirement for maintaining a vigilant watch. Do not place liquid-filled containers onAlways maintain a vigilant watch whileFire or electrical shock can result if a liquidDo not leave ropes or other objectsDo not operate the equipment with wetFire, electrical shock or injury can result ifUse the correct fuse. Use of an incorrect fuse can cause fireWarning Labels. Warning labels are attached to the equipment. Do not remove any label. If a label is missingConfirm that TX has stopped beforeName. Warning Label 1. Type:Name. Warning Sticker. Type:This page is intentionally left blank.Foreword.xi. System Configuration.xiii. Chapter 1: Operational Overview.

1-1Control Description. 1-2Inserting a Chart Card. 1-4. Removing a Chart Card. 1-4. Precautions with Chart Cards. 1-4Switching Active Display in Combination Displays. 1-6Moving the Cursor. 1-9. Status Bar. 1-9. ROTOkeys. 1-10. Context-Sensitive (Pop-up) Menus. 1-11. NavData. 1-12Selecting Language. 1-17. Setting Your Boat’s Characteristics. 1-17Chapter 2: Chart Plotter Operation. 2-1Selecting Chart Type. 2-1. Selecting Chart Scale. 2-1. Selecting Presentation Mode. 2-2. Moving the Chart. 2-2Finding Range and Bearing to a Location. 2-4. Displaying Object Information. 2-5. Port Information. 2-5. Tide Information. 2-5. TIdal Current Information. 2-7. Overlays. 2-8. Shading. 2-8. Weather. 2-8. Satellite Image. 2-8. Animation. 2-8Boat Icon. 2-9. Range Rings. 2-9About Points. 2-12. Entering a Point. 2-12. Following a Point. 2-14. Point Follow Options. 2-16. Moving a Point. 2-18. Editing Attributes and Details for a Point. 2-19. Finding a Point on a Map. 2-20. Finding Nearest Port from a Point. 2-20. Deleting a Point. 2-21. Deleting All Points. 2-21. Globally Showing, Hiding Points. 2-21Creating a New Route. 2-22. Route List. 2-24. Following a Route. 2-25. Route Follow Options. 2-27. Route Log. 2-29. Reviewing Passage Plan. 2-30. Editing a Route On-screen. 2-32. Finding a Route on a Map. 2-33. Renaming a Route. 2-33. Merging Two Routes. 2-33. Deleting Routes. 2-34. Globally Showing, Hiding Routes. 2-35Track Thickness. 2-36. Track Color. 2-37. Clearing Current Track. 2-37. Saving Current Track. 2-38. Replaying Saved Track. 2-38. Erasing Saved Track. 2-38WPT Arrival Alarm. 2-39. Final Arrival Alarm. 2-39. XTE Alarm. 2-40. Anchor Watch Alarm. 2-40. Proximity Alarm. 2-40. Depth Alarm. 2-40. Sea Surface Temperature Alarm. 2-41. Speed Alarm. 2-41. Trip Alarm. 2-41. Countdown Timer. 2-41. Alarm Clock. 2-41. Setting an Alarm. 2-41. Alarm Audio Options. 2-43. Alarm Log. 2-44Chapter 3: Radar Operation. 3-1Adjusting the Gain. 3-2. Suppressing Sea Clutter. 3-3.

Suppressing Rain Clutter. 3-4. Range Scale. 3-5. Presentation Mode. 3-6. Description of Presentation Modes. 3-6. Measuring the Range. 3-9. Displaying the Range Rings. 3-9. Measuring Range with a VRM. 3-9. Erasing a VRM. 3-10. Measuring Bearing. 3-11. Measuring Bearing with an EBL. 3-11. Erasing an EBL. 3-12. Selecting true or relative bearing. 3-12. Erasing the Heading Line, North Marker. 3-13. Reducing Radar Interference. 3-14. Guard Zone. 3-15. Setting a Guard Zone. 3-15. Acknowledging Guard Zone. 3-15. Clearing a Guard Zone. 3-16. Enabling, Disabling Audio Alarm. 3-16. Proximity Target Alarm. 3-16. Watchman. 3-17. Echo Trails. 3-17. Echo Stretch. 3-18. Echo Average. 3-18. Automatic Offcenter. 3-19. Setting Auto Offcenter Speed. 3-19. Enabling, Disabling Auto Offcenter. 3-19. Wiper. 3-19. Echo Color. 3-20. Background Color. 3-20. Displaying Own Ship Icon. 3-21. Radar Overlay Automatic Range. 3-21. Interpreting the Radar Display. 3-22. False Echoes. 3-22. Search and Rescue Transponder (SART). 3-24. Racon (Radar Beacon). 3-25. Chapter 4: ARPA Operation. 4-1Manually Acquiring a Target. 4-2. Clearing a Lost Target. 4-2. Cancelling Tracking of Targets. 4-3. Setting ARPA Acquisition Area. 4-4Selecting Track History Plotting Interval. 4-5. Showing, Hiding the Track History Display. 4-5. ARPA Symbol Color. 4-6. Chapter 5: AIS Operation.5-1AIS Target Symbols. 5-1. Setting Acquisition Range. 5-2. Track History Display. 5-3. Selecting Track History Plotting Interval. 5-3. Showing, Hiding the Track History Display. 5-3. Showing, Hiding Target ID. 5-3. Chapter 6: Card Operations.6-1Saving and Loading Data. 6-2. Saving Data. 6-2. Loading Data. 6-3. Deleting Files. 6-3. Moving Files. 6-3. Manage Chart Catalog. 6-3. Request Update File. 6-3. Load Update File. 6-3. Chapter 7: Customizing Your Unit.7-1Selecting the ROTOkey Set to Use. 7-4. Customizing the ROTOkeys. 7-5. NavData. 7-7. Changing Display Arrangements. 7-10. Chart Setup. 7-12. Mapmedia Sub Menu. 7-12. S52 Sub Menu.

7-12. C-Map Sub Menu. 7-13. General Menu. 7-14. Settings Sub Menu. 7-14. Units Sub Menu. 7-16. System Menu. 7-18. Settings Sub Menu. 7-18. Calibration Sub Menu. 7-19. Radar Sub Menu. 7-20. Weather Display Setup. 7-22. Settings Sub Menu. 7-22. Sirius Sub Menu. 7-23. Chapter 8: Maintenance, Troubleshooting.8-1Maintenance. 8-1. Replacing Fuses. 8-2. Replacing Battery. 8-2. Replacing the Magnetron. 8-2General Troubleshooting. 8-3. Radar Troubleshooting. 8-3. Chart Plotter Troubleshooting. 8-4. Diagnostic Wizard. 8-4. Memory Test. 8-4. Keyboard Test. 8-5. BBGPS Test. 8-5. GPS Status Display. 8-5. Restoring Default Settings. 8-6. Specifications.SP-1. Index. IN-1This page intentionally left blank.A Word to the Owner of the MFDBB. Congratulations on your choice of the MFDBB (Multi Function Display), an integral. We are confident you willFor over 50 years FURUNO Electric Company has enjoyed an enviable reputation forThis dedication to excellence is furthered by ourThis equipment is designed and constructed to meet the rigorous demands of the marine environment. However, no machine can perform its intended function unless operated and maintained properly. Please carefully read and follow the recommendedThank you for considering and purchasing FURUNO equipment. Features. AIS receiver, etc. into an easy to use networked navigation system. A high quality “fogless” color LCD presents navigation data, chart, radar echoes, etc.Expandability is virtually limitless with USB connection, and up to 10 NavNet devices may be connected. Chart plotter. Radar sensor (option)OtherEngine, Weather, Wind, TIde, Multimedia. (To be developed)Weather Station, FI-30 (instrument series), Motion Sensor, etc.This page is intentionally left blank.This chapter provides the information necessary to get you started using your multiThis manual shows dedicated keys in bold face upper case letter; for example, DISP. All other labelled items such as ROTOkeys are shown in body text font.

This multi function display comes with either the Control Unit (MCU-001) or DIsplay. Control Unit (DCU12). (Alternatively necessary software is incorporated in a PC.). Their controls are identical except for the POWER switch; on the DCU12 it also functions to adjust display brilliance.

furuno mfd12 user manual

The num- ber of minutes an echo is displayed on the screen is controlled by the picture advance speed. This bar shows operation information with messages, and sensor state with the icons. The color of the bar changes according to the types of messages as shown below. Bar color Type of message Alarm messages. To display a pop-up menu, select an object and hit the right- click button. A pop-up can also be shown if you push the same button in any position on the active display. You can select the data to display in the boxes, and show or hide the boxes as necessary. A box can show one or more data. The data that you can show depends on your system configuration. The number of menus depends on equipment connected. To show the menu, press the MENU key. How to use the menu 1. Set the weather display. Points Weather Set routes. Push the Status icon RotoKey to show the icon in green to activate the item, or gray to deactivate. Alphanumeric data input box Rotate the RotoKey to select alphanu- meric character (A-Z, 0-9) then push. Simplified icon (default boat icon) 1. You need either position data from a navigation device, or heading and speed data to calculate position by dead reckoning. You activate the MOB from the chart plotter display and MOB position is marked on both the chart plotter and radar displays. Simple information in- cludes point name (MOB), and range and bearing to the MOB position.Below are the steps to start fax operation. 1. At installation of this equipment, connect the FAX-30 to the NavNet and check that the equipment identifies the FAX-30, through the Installation Wizard. A vector chart for the US coastline (Alaska and Hawaii included) is provided also. The selected chart scale appears at the top left- hand position on the screen.Another method is to put the cursor on the orientation mode icon at the top-left position then push the left-click button. The default shape is “simplified icon”.

• furuno mfd12 installation manual, furuno mfd12 operator s manual, furuno mfd12 user manual, furuno mfd12 user manual pdf, furuno mfd12 user manual download, furuno mfd12 user manual free, furuno mfd12 user manual 2017.

Indicates a condition that can cause death or serious injury if WARNING not avoided. Indicates a condition that can cause minor or moderate injury if CAUTION not avoided. Warning, Caution Mandatory Action Prohibitive Action WARNING. Always check your position against all Fire or electrical shock can occur if water available aids to navigation, for the safety gets inside the equipment. We are confident you will see why the FU- RUNO name has become synonymous with quality and reliability. Some of the topics are how to turn on the equipment and an introduction to the main displays.A key that has two text labels separated by a line has two functions. The top label is the main function and the bottom label, the secondary function. Short-push to access the main function and long-push (approximately three seconds) to access the second- ary function. Controls are illuminated for nighttime use. MFD8 MFD12 Control description Mouse Label Function operation Short-push: Turn ON the power. Adjust the panel dimmer. To turn the power OFF, press and hold the same key BRILL until the screen is black. When you turn on the power, two or three beeps sound and the lamp near the power switch lights. Set and remove SD cards as shown below. The recommended capacity for the cards is 128 MB to 2 GB. The Secure Digital High Capacity (SDHC) SD cards cannot be used. How to format a SD card You do not normally need to format a SD card for use with the system. A vector chart for the US coastline (with Alaska and Hawaii) is provided also. The plotter section has functions to enter waypoints, and create and plan routes. The chart plotter receives position information supplied from the position-fixing equip- ment like GPS or DGPS. The radar detects the position and movement of objects. Objects are shown on the radar display at their measured distances and bearings in intensities according to echo strength. Ech- oes are scrolled across the screen from the right position to the left position.

Activate Trackback Course to follow Track (red dashed line) First destination Arrows point in Route direction to point follow route Trackback route following options When you are following a route, you can do the following from the Route pop-up menu. This true 3D environment gives you all of the information you require with no restrictions on the information you can see. You can plan your routes, enter points, etc.This sequence allows you to adjust the pitch and orientation. 1. This feature expands both objects on the chart and the under- water vertically so that you can easily see the shape of the objects and position. These overlays are depth shading, weather, satellite photo, and animation. 3.2.1 Depth Shading Overlay The depth shading overlay shows the depths in red (shallow), yellow (medium) and green (deep). These dis- plays are available only in North America and with connection of a Sirius weather re- ceiver. Four types are available: Wx Radar, Wx Data, and Adv Wx Data, and Marine Zone. These zones can be displayed on the screen with lines, like in the illustration shown below Marine zone. Push the RotoKey to show or hide the radar overlay.You can overlay this information on the chart plotter display. The tidal information symbol ( ) appears at the locations of tidal recording stations. When you select a symbol, you get a graph of predicted maximum and minimum tide heights, and times for sunrise and sunset. How to display the tide graph The NavNet 3D has worldwide tide and current information. A point can be a fishing spot, reference point and other important locations. You can use a point you have entered to set a destination. This unit has 2,000 points into which you can enter position information. To put the point at a different location, edit the point data (position, symbol, etc.) before marking a point. 1. Push the RotoKey twice then the right side of the display shows the point information like in the illustration shown below. Total no.

Other shapes are available, from the menu, like yacht and sailboat.Range and bearing between the two points are digitally indicated on the screen. 1. The multiple chart plotter display lets you see the conditions around your vessel on both short and long ranges. Also, you can see how your vessel moves toward your destination from more than one angle. Shallow Contour: Show shallow depth contours in dark blue. Safety Contour: Show safety depth contours in medium blue. Deep Contour: Show deep depth contours in light blue. Depths greater than 1800 feet are shown in white. The chart features are turned on or off according to setting. Unknown Object: Unknown objects that appear on the chart. When your vessel is within the set value, audio and visual alarms are released. 2.10.4 Depth Alarm The depth alarm tells you when the depth to the bottom is over or under the value you. The alarm can be output from this equipment, from external equipment or from both this equipment and external equipment. Active alarm Past alarms 2-16. Your track lets you see how your vessel has moved. The track is saved to the hard disk if the track is active. A line runs between each track point. If you are following the same track many times, you can show the track in the thinnest width to keep the screen clear. Refer to the description below and on the next page. 999 ft Depth range Sea surface temperature range Speed Depth variation Fixed color Date Sea surface temperature variation Fixed color: Single-color track in white, blue, purple, cyan, green, yellow and red. Depth range: Change the color of the track with depth. Set a limit for each color.Rotate the key to select a character then push the key to validate your selection.Detailed track information includes simple track information plus the information shown below.

The correct setting shows some background noise on the screen. If you do not use enough gain, weak echoes are erased. The sea clutter increases in width as the height of waves and the height of the antenna above the water increase. If the sea clutter is strong, targets can be hidden inside the clutter, like in the left-hand figure shown below. The heading data is required in modes except the head-up mode. When the heading data is lost, the orientation mode automatically goes to head-up. A red “X” is also put on the compass icon on the status bar. North is at the top of the screen. The heading line changes its direction according to your heading. True motion display North marker. These rings are the concentric solid circles about your vessel. The VRM is then fixed at the range selected. Target VRM1 VRM2 VRM box 6.7.3 How to Deactivate a VRM 1. Push the RotoKey to show the soft controls. (In the default arrangement, a short- push activates VRM1 and a long-push activates VRM1 and VRM2.) 2. The selected EBL and the related EBL indication are erased. The position can be off-centered in the bow, stern, port or starboard di- rection, but not more than 75% of the range in use. To off-center the radar picture, operate the ScrollingPad. This line connects between your position to the outer edge of the radar display. The line is at zero de- grees on the bearing scale in the head-up mode. The orientation of the line changes in the north-up, course-up and true motion modes with the movement of your vessel. The interference shows on the screen in many bright dots. The dots can be random or in the shape of dotted lines that run from the center to the edge of the display. Push the right- click button to show the Guard Alarm pop-up menu. Use the RotoKey to activate or deactivate the alarm.This function helps alert you to possible collision conditions.

of points Point settings Point name, range and bearing to point and point group name appear here. If those settings do not meet your requirements, you can the settings as shown below. 1. The point becomes larger if the point is se- lected correctly. Method 2: Pop-up menu 1. The point is erased when the navigation is cancelled. Pop-up menu Put the cursor on the location then push the right-click button to show the Cursor Po- sition pop-up menu. This line is the course to follow to get to the point. The point arrival area is indicated with a circle, or both cir- cle and line.Push the RotoKey. When you steer to keep away from an obstruction or the vessel drifts, you go off course as shown in Line 1 in the fig- ure. A route is a series of points entered in the order to use for navigation. A route can con- tain up to a maximum of 100 points, and this equipment stores 200 routes. You create a route by pointing and clicking geographical positions on the screen. These positions are marked with blue solid circles. The new route takes the name of the 1st route selected and the 2nd route selected is deleted. All route data is updated. How the routes are joined depends on route selection order. Push the left-click button to get detailed information. This information includes name of route, length of route, no. The display shows route information for the route selected. When you steer to keep away from an obstruction or the vessel drifts, you go off course as shown in Line 1 in the fig- ure. Restart Reverse Extend Route Route Info 3. Cross Line: Change the waypoint when the vessel moves through an imaginary cross line (vertical line) that moves through the center of the destination point. Use this feature to find the next point in a route when the point is not within the current dis- play range. Activate or deactivate this feature as follows. 1. This key operates like the volume control of a broadcast receiver, which amplifies received signals.

Also, you can measure the time from the right edge to a location. For example, you can measure how many minutes ago an echo appeared. Weak echoes 1. Press the MENU key to open the menu. 2. This condition is caused by the movement attenuation of the ultrasonic wave. Use this feature to help you separate fish near the bottom from the bottom echo. 1. Press the MENU key to open the menu. 2. Rotate the knob to set numeric then push the key to validate the setting. End depth Start depth (from sea surface) (from bottom) Alarm range Alarm range marker End depth (from sea surface) Start depth (from bottom) The information given by this feature is for only refer- ence purposes. ACCU-FISH uses the high- and low-frequency echoes that return at the center of the transducer beam to calculate the length of a fish. If the size is wrong, add an offset to the measured value to get accurate indication on the screen.Day Background Color: Select the background color for use during daylight hours. The table shown below shows those features that can be con- trolled from the NavNet. The top color (reddish-brown) is the strongest color and the lower colors the weaker colors. To find the bottom characteristic, use a long pulse length and normal gain. For the hard and rough bottom, the bottom echo is reddish-brown with a long tail. Less Reddish Strong (Sparse echo) Surface noise Air bubbles in the water When the sea is rough or the vessel makes a quick turn, there can be blank spots in the bottom echo. DO NOT re- move the card while the LED is flashing, to prevent loss of data or damage to the card. Note 2: User setup items cannot be imported or exported between MFD8, MFD12 and MFDBB (and vice versa). When you import points and routes from an SD card, all points and routes currently stored in the MFD are replaced with those on the SD card. Points and routes cannot be entered when their related memories are full. If you need to save track, points and routes permanently, save them to a SD card.

Use this feature to use the same data across the NavNet network. 1. The SD card confirmation screen appears after you push the RotoKey. 3. Select Yes then push the RotoKey. The card is formatted, the file FURUNO Sys- tem Diagram.sys is created and saved to the SD card. This may take several min- utes. When the copy is completed.The message “Now Initializing” appears. It may take several minutes before you move to the next step. A video signal can be seen only on the MFD that receives the video signal. Below is the pro- cedure with the RotoKey. 1. Activate the camera mode then push the RotoKey. 2. Select the number of hot pages to display as in the procedure shown below. Select the data to display as follows: 1. Activate the instrument display then push the CTRL key to select the instrument display with the yellow cursor. Analog true wind angle Analog and digital true wind speed Heading Digital true wind angle Angle (S: Starboard, P: Port) 10.4.5 Apparent Wind Display The apparent wind display provides digital and analog indications of apparent wind. You, the customer, agree to release FURUNO ELECTRIC CO., LTD., Sirius Satellite Radio Inc., Navcast Inc. and WSI Corporation from any problems that occur from this service. Color Icon Meaning Pink Storm cast Dark yellow (recorded in last 0-5 min.) Medium yellow (recorded in last 5-10 min.) Lightning Light yellow (recorded in last 10-15 min.) In the split window configuration, only one can be displayed on either screen. Only one of the three can be shown in “plain color” when all three are displayed, and SST has priority. Lower temperatures are in blue. Put the cur- sor on a surface pressure icon to show the name of the surface pressure. These storms include tropical disturbances, depressions, storms and cyclones, hurricanes, typhoons and super ty- phoons. These symbols are displayed in three different colors: Grey, historical; Red- current, and Orange, forecast. For additional information, press the left-click button.

(a) True target trails (b) Relative target trails (No smearing of Targets moving relative stationary targets) The relative trails show the relative movements between targets and your vessel. True motion trails show the movements of targets according to the targets over-the-ground speeds and courses. True trails re- quire position and heading information. If you have a weak, long-range target that re- quires closer inspection, use the echo stretch to magnify the target. This function magnifies the targets and sea clutter and radar interference. The amount of automatic shift is calculated according to the speed of your vessel. The and the amount of shift is limited to 50% of the range in use. Push the RotoKey to show or hide the active route. There is no time delay between the two pictures and you have separate control of each picture. This feature lets you keep a close watch on close-range targets and far targets. The table shown below shows which features can be controlled from the NavNet 3D. Note that you should turn off Guard Polygon at the radar to control the radar from the NavNet 3D. You can identify false targets when you understand why the false echoes appear. If the angle opposite the antenna is more than one or two degrees, a sector or shadow sector appears on the screen. Targets are not displayed within the sector. Radar antenna Radar. A SART transmits when it receives a radar pulse from any X-Band (3 cm) radar within a range of approximately 8 nm. When a SART receives a radar pulse, the SART transmits a response across all the radar fre- quency band. If the racon signal is sent on the same frequency as that of the radar, the signal appears on the radar dis- play. The targets can be acquired manually or automatically. All 30 targets can be acquired manually when the ARPA acquisition area is not active. If the ARPA acquisition area is active, that total is equally divided between manual and auto acqui- sition.

For detailed data, put the cursor on the target then push the left-click button. Drag cursor to Point B Point A Point B ARPA Acquistion Zone Note 1: To set a 360-degree guard zone, set the same bearing for both the position A and position B. How to show or hide the track history display On the radar display or the chart plotter display, long-push the RotoKey to show the soft controls. A fish finder shows the images of underwater objects, like fish and the seabed on the display.These modes are single frequency, dual fre- quency, marker zoom, bottom zoom, bottom lock, and A-scope. 7.2.1 Single Frequency Display The single frequency display shows either the low-frequency or high-frequency picture on all the screen. Use the dual frequency display to compare the same picture with two different sounding fre- quencies. The low-frequency picture is on the left, and the high-frequency is on the right. This display helps you find the density of the bottom. A bottom displayed with a short echo tail normally indicates the bottom is soft (sand bottom, etc.). This display shows the echoes at each transmission with the amplitudes and tone in balance with their intensities. This display helps you identify possible fish species and bottom structure. The main features of the automatic mode are as shown below. The gain, range and range shift functions let you select the depth you can see on the screen. Set the gain to show a slight amount of noise on the screen. Increase the gain for greater depths and lower then gain for shallow waters. Gain too high Gain proper Gain too low. A fast advance speed expands the size of a school of fish horizontally on the screen. A slow advance speed shortens the school of fish. Use a fast advance speed to see the hard bottom. When these types of interference appear on the screen, use the interference rejector to reduce the interference. Three or four levels are available according to type of network sounder.

Simple storm cell cast information Detailed storm cell cast information 11-8. The fill color of the icon indicates when the lightning hit occurred. See the table below for color and period. The number of lightning bolt markers indicates the number of times lightning has hit. For simple infor- mation, put the cursor on the city icon ( ). For additional information, push the left- click button. Simple city information Detailed city information 11-10. For simple infor- mation, put the cursor on the buoy icon ( ). For additional information, press the left-click button. Simple buoy information Scroll for more data Detailed buoy data 11-11. Sirius sends warning messages to tell you about bad weather.NO REPORT AVAILABLE FOR THIS MARINE ZONE. 11.4.3 Tropical Weather Statement Below is an example of a tropical weather statement. 11-13. All such vessels also receive data from other AIS equipped vessels and display their positions and other relevant information. The AIS broadcasts this information over a VHF transceiver. When the screen becomes full of AIS targets, you can remove some of the targets if you indicate a different display range. For simple data, put the cursor on an AIS target. For detailed data, put the cursor on the target then push the left-click button. All the adjustments are done from the menu. The three quantities are basic, standard and full. If those quantities do not meet your requirements, a “custom” set of keys is available also. Reverse Reverse route following direction. Show Show or hide routes now dis- played. Animate Animate Animate weather or tidal current forecast. ARPA Show or hide ARPA display. Show or hide AIS display. History Show or hide history display. Cancel All Stop tracking on all ARPA targets. Clear Lost Clear lost ARPA target. Cycle 1 Select video switching cycle 1. Cycle 2 Select video switching cycle 2. Video ID Show or hide video ID. Off: Turn off the data. Single: Display data individually. Split: Display two items per box.

For example, SOG and COG show both of those data in one box. The procedure shown below describes how to put the radar, chart plotter and fish finder displays in a three-way split screen. 1. Rotate the RotoKey to select a display (for example, the fish finder display) then push the key. Your arrangement of displays appears on the screen and the display selection window is updated according to your arrangement. RotoKey) is operated. Font Size Select the font for all indications, menus and the Medium, Large like. Description of Global-Units menu Menu item Options Range (Long) Nautical mile, kilometer, mile. See the Instal- lation Manual. Reset Default Settings: Restore all default settings for your system. Draft: In the default setting, the fish finder shows the depth from the transducer. For depth from the surface, set the draft of your vessel here. Manual Tuning: If you require manual tuning, do the following: 1. Use the RANGE key to select the 24-mile range. 2. To prevent this interfer- ence, lower your TX power and ask the other vessel to lower their TX power. If you can not identify the fish near the bottom from the bottom echo, increase the bottom level. For the DFF1, set both of these items to “-20”. External KP: Turn on to sync with external keying pulse. Use this feature to clear the surface of unnecessary echoes to look for surface fish. The setting range is 0-10, and 0 is Off. “10” deletes unnecessary echoes from the surface to approximately 16 ft. From this menu you can see, update, add and delete charts. 13.7.1 How to View Your Charts 1. NOTICE WARNING Do not apply paint, anti-corrosive ELECTRICAL SHOCK HAZARD Do not open the equipment.If long-range performance appears to have decreased, contact a FURUNO agent or dealer about replacement of the magnetron. Magnetron information. If you cannot restore normal operation, do not check inside the unit. Have a qualified technician check the equipment. 14.4.1 General Troubleshooting Problem Remedy.

Check that antenna connector is fastened and navigator is cor- rectly connected. The track of your vessel is not Check that the track is turned on. (Put the cursor on the boat icon plotted. Discover everything Scribd has to offer, including books and audiobooks from major publishers. Start Free Trial Cancel anytime.Browse Books Site Directory Site Language: English Change Language English Change Language. Page Count: 17 Any combination of up to 10 (ten) MFDs ar e allowed in one Ne twork. However, the actual number of displays in th e system may be hi gher if MFDBBs ar e installed using “Clone” or “Extended” Display Mode. More information abo ut the Clone and Extended Modes fo r the MFDB B can be fo und in th is docume nt Q2.SYS Can I connect multiple position, depth and other dat a sensors to the syste m? Multiple sensors of the same or dif ferent kinds (i.e. two GPS Sensors) may be connec ted to any NN3D n etwork fo r backu p purposes. When mult iple sensors providi ng independ ent but redun dant data a re connect ed, the ins taller will hav e to define the pri mary sensor at the Master MFD during inst allation. Pr imary sensor selections are global setti ngs, as they will be used and displayed by all NN3D MFDs in a network. All other sensors pr oviding the redundant information will be used as “Back -Up” senso rs. NN3D will aut omatically “S witch” and u tilize these back-up sensors in the event that a fai lure occurs with the primary sensor. Q3.SYS How many Digital Radar Sensors (DRS) can be installed in one network. Up to 2 (two) DR S can be install ed and contr olled in one network. Q4.SYS How many Fish Finders can be inst alled in one net w ork. Up to two Netw ork Fish Finders can be instal led and contr olled in one NN3D network. For exampl e, both a DFF1 and DFF 3 may be inst alled on one vessel and the operator may select which one to be enabled as the echo sounder so urce.

This allows the vessel to change geographic regions and inst antly select the optimal echo sounder source for a particular fishery. Q5.SYS What is the NavNet 3D memory cap acity. All NN3D MFDs an d Black Box systems have a ruggedized, shock resistant internal Hard Di sk Drive (HDD) with 40 Giga bytes of memory storage ca pacity. Q6.SYS Does MFD have a cap ability to convert NME A2000 NMEA0183. In case of multiple GPS, the position which is out put is the one currentl y used by the display. Q7.SYS Can Engi ne Dat a be displayed o n MFD. Y es, certai n engine dat a (up to three engi nes) in NMEA2000 for mat is compati ble and may be displaye d on any NN3D MFD in t he Network. T he currently accepted engine dat a is as follows: - Engine S peed (Revolut ions) (PGN 127488) - Engine Boost Pressure (PGN 1 27488) - Engine Oil Pr essure (PGN 127489) - Engine T emperature (PGN 1 27489) - Engine T emperature S tatu s (PGN 127489) - Engine W arning S tatus (PGN 127489) The NN3D was designed as a network system. Ra dar, Sounder, IP Camera, Poin ts, Routes, T racks, Navigat ion Data, a nd System Setting s are all shared via Ethernet on the NN3D netw ork. Please note that the Chart s are not shared across the network and need to be installed on the Internal Memory of every MF D. Q10.SYS What is the difference between MFD12 and DCU12. The DCU12 is a suit able option for those wishing to use the advan ced features of the MFDBB with a displ ay-based keyboard. Power for the Di gital Radar Sensor is supp lied b y MFD. Some combina tions require the addi tional Power Sup ply Unit in order to provide enough power for t he DRS.However, the standard Mo use HID drive rs will load automatical ly, allowing m ost mice and wirel ess mice to work fine.. Q2.CON What is Pow er Synchronization. A NN3 D netwo rk is a system in which al l components sha re info rmation (navi gation data, setti ngs, point s, routes, etc) wit h each other.

T o allow proper network synchronization and functionality, the MFDs ha ve a special “sleep mode” that allows each MFD to process data while consuming low p ower. The scr een is ON and the user can interact with the device. Even though the MFD seems to be tur ned off, it will still process and share inform ation with other MFDs on the netw ork. The MFD consumes lower curren t in this sta te. N o power is consume d in this state Sleep Mode Fun ctional Descrip tion: When the first MFD is powered ON (usin g the power key), all the other networked MFD(s) au tomatically st art in sleep mode. Using the Power key on an MFD in sleep mode will turn it ON. Using the Po wer key on any MFD that is turned “ON” will turn the system (all the MFDs) complet ely OFF. If you want to turn a MFD back in sleep mode (af ter he has been powered ON ), use the RotoKey “Sleep” IMPO RT ANT: Full Pow er Synchronization fu nctionality requir es the use of Furuno propriet ary Hubs. T he Internal MFDBB H ub and the optional F uruno HUB101 bo th provide NN3D full Power Synchronization f unctionality. When connect ed to an MFD, the switch must be setup to all ow the Power Synchroni zation.H ere is a list of all devic es that supp ort the Po wer Synchronization: - All NN3D Display: MFD8, MFD12, MFDBB and DC U12 - All NN3D Radar Power Supply: P SU-012 and PSU-13 - Sounder: DFF1 and DFF 3 Q4.CON Can a st andard Ethernet Switch be used for NavNet 3D. Y es, a 100Mbp s Switch can be used. In this case, “ 2-p air ” Eth ernet cable must be used between each MF D and the generic Et hernet Switch so that the F uruno Power Synchronization signal does not interf ere with or harm the Eth ernet Switch. Failure to do so could damage the sw itch and any other com ponents connected t o it. Note that when a regular switch is used, the Power Sync hronization will not fu lly work. The use of the Fur uno Hub is strongly advi sed.

furuno instruction manual

Fire or electrical shock can result if waterImmediately turn off the power at theContinued use of the equipment can causeContact a FURUNOUse of the equipment as a stepping stool,Do not disassemble or modify theNo one navigation device should ever beFire, electrical shock or serious injury canAlways confirm position against all availableDo not place liquid-filled containers onFire or electrical shock can result if a liquidA warning label is attached to the equipment. Do not remove the label. If theImmediately turn off the power at theContinued use of the equipment can causeContact a FURUNOName: Warning Label (1). Type: 86-003-1011-0. Code No.: 100-236-230SYSTEM CONFIGURATIONS. xiiiFor over 50 years FURUNO Electric Company has enjoyed an enviableThis dedication toYour radar is designed and constructed to meet the rigorous demands of thePlease carefully read and follow theWe would appreciate feedback from you, the end-user, about whether we areThank you for considering and purchasing FURUNO.The MODEL-1700C series, MODEL-1700 series works within our new productnetwork system called the “NavNet.” Each product has an IP address toThe main features are. Omnipad.NavNet product on board through an optional LAN cable (Ethernet 10 Base T). Each NavNet product is assigned an IP address to enable transfer of imagesFor example, video plotter pictures can be transferredPictures received via the NavNet may be adjusted atAn NavNet system may consist of a single, dual, or three and more NavNetSingle unit. Antenna UnitBlackbox GPS UnitSensor. External Buzzer. Navigator. Navigator. Other F-NET UnitExternal. TransducerSingle-unit NavNet systemBlackbox. GPS UnitRadar data. Plotter data. Two-unit NavNet system. Three-or more unit system. Blackbox. GPS UnitPlotter data. Radar dataExternal. Transducer. ETR-FN (option). Three-or more unit NavNet systemControl overview. Chart card insertion. Contrast, brilliance and hue (MODEL-1700C series only) adjustments. Display selection.

• furuno user manual, furuno instruction manual, furuno instruction manual pdf, furuno instruction manual instructions, furuno instruction manual download, furuno instruction manual 2016.

Be (including transmittable), we have been permission of the copyright holder without obtaining the permission of the copyright holder, duplicate all or part of the contents of the instruction manual to be provided in this service, modification, transmission. You can, however, that to the extent necessary for the purpose of personal use in other than operating purposes, to use our products, customers, print, etc.Please note you may not have the manual you would like your products. Please be forewarned. Please be forewarned. Therefore, the instruction manual that is provided with this service, and content instruction manual that comes with instruction manual and that comes with the product you have purchased, the product that you are on the market at the moment Please note it may be different. In particular, we are on the things of the product originally released as a rule manual of Japanese and non-English version. Please confirm the Japanese or English for newer content. This service does not provide a printed manual other than these. With regard to printing of the manual other than, please refer to the ones that are included with the product you purchased. Please be forewarned. Please be forewarned. Nishinomi ya, Japan. Te l e p h o n e. Te l e f a x:Printed in Japan. PUB. No. OME-34940A heater can melt the equipment's powerOnly qualified personnelUse the proper fuse. Turn off the radar powerFuse rating is shown on the equipment. Use of a wrong fuse can result in equipmentMake sure no rain or water splash leaksPrevent the potential risk ofRF radiation hazard.

You can adjust display brilliance, panel brilliance, contrast (MODEL-1700 seriesA set of soft keys forAn adjustment windowThis window shows the name of the item selectedDisplay brilliance and panel brilliance windowsEight levels of display brilliance and panel brilliancePress the CONTST soft key toMODEL-1700C series), in which case the item selected is adjusted cyclically,MANUAL SET restores default hue setting. Characters. Radar ring. Night. Red. Red. Day. Black. Green. Twilight. Green. Green. Applicable mode. Plotter, radar, sounder. Radar. Radar echo. Green. Yellow. Green. Radar. Background. Landmass. Black. Light Yellow. White. Yellow. Blue. Green. Plotter, radar, sounder. RadarIf you have a radar, navigator and video sounder connected, four full-screenFull screenCombination screen. Overlay screen. Display screens. The table below shows the displays available with each screen type. Screen type and available display screen. Full screen. Radar, plotter, sounder, navCombination screen options. Plotter radar, video sounder,Overlay screen optionsThe icons ofPAGE 1-PAGE 5 are “hot page”For furtherPreset combinationThe corresponding combination screen selection window appears.A soft key is provided in relevant combination and overlay screens (MODEL1700C series only) to switch control between displays. In the example below the. RADAR CNTL and PLOT CNTL soft keys enable switching control between theRadar display selectedPlotter display selectedWhen more than one network radar or a blackbox echo sounder is connected toThis is notRadar source and sounder source windowsDestination. The MOB (Man Overboard) mark functions to mark man overboard position. YouBearing and rangeRange, bearing. ManMOB concept. The display shows the waypointIf you select the MOBThis line shows the shortest course to the MOBB 0.49 nm. Bearing to MOB position. Range to MOB position. MOB data box.

MOB (Man OverBoard) mark entry. Data boxes. Function keys. Demonstration displayThe radar functions are operated with 17 controls. Ten controls are labeled andThe five soft keys’ provideThe cursor pad’s main function is toWhenever you operate a key a single beepInvalid operation emits three beeps. On menu screen: Returns toOn other screen: Displays theTouch-and-release. Registers own ship’sPress three seconds. Marks man overboardSoft keys. Curor pad. All modes: Shifts cursor; selects items on menus. Radar: Shifts cursor, EBL, VRM. Plotter: Shifts cursor. Sounder: Shifts VRM, crosshair cursor. Clears data, erases selected mark. Selects a range. ENTER knob. Registers options on menus; selectsRadar: Displays the soft keys for adjustment of. Sounder: Adjusts gain. Shows or hides the softTouch-and-release: Opens theChart slot. Control panelThe five soft keys’ function changes according to the operation. Their labels forWhen you press a soft key one of three operations is executed: the selectedSome soft keys show their currently selected soft key option in reverse video asRadar displayAfter you have selected desired. Alphabet, symbol, numeric. NumericsYou may insert the chart card of your choice as follows:Chart slot. Display unitNote 1: For C-MAP card, do not eject it while the chart is being drawn. This mayIf error isFor any NG, try to pressStartup testChart disclaimer. Startup sequence. You may press any key at the chart disclaimer screen to show the last-used radarRelease theNote: The very first time the system is powered the display shows the messageFor further details about theContrast, Hue.

In this page you find schematic, users and instructions manuals, service manuals, technical supplement, leaf leads and other good stuff. If you have some stuff that not is listed here you can donate this by contact mods.dk. And when you click on the file or icon it will count as a download. If you want to see manuals from other manufactories you can click on the manufactory menu in the left side. You can also click here to see all the manufactories that mods.dk have manuals, schematics or other files from. Please try again.Register a free business account Exclusive access to cleaning, safety, and health supplies. Create a free business account to purchase Please try your search again later.You can edit your question or post anyway.Contains the following sections: Safety Instructions, Equipment Lists, System Configurations, Mounting, Wiring, Adjustment, Options, packing Lists, Outline Drawings, Interconnection Diagrams. Only contains instructions pertaining to installation. Does NOT contain any operator or system usage instructions which are sold separately. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzes reviews to verify trustworthiness. It allows documents to display on devices without pdf viewers specifically mobile devices, a new Google requirement. Note also that some documents have blank pages.No personal information is saved. I do not collect statistics on your visit. You can disable cookies in your browser if you like but it is not recommended for this site. I do not sell cookies. Go to a bakery for that. In fact I do not sell anything. To disable cookies from L-36.com, please refer to the Help button in your browser. Privacy Policy: I do not sell or share any user data or anything else for that matter.

To erase an MOB mark, place the cursor on the MOB mark and press theData boxes, providing navigation data, may be shown at the bottom of any fullscreen display. Up to six data boxes (two in case of large characters) may beFurther, data boxes may be set independently for eachFor how to select data for the data boxes,Data boxesRadar display, showing data boxesRadar. Plotter: D.BOX ON, D.BOX OFFYou may select the location for data boxes as follows:If a data box is obscuring a desired object you may temporarily erase the box. Use the cursor pad to place the cursor inside the data box you wish to erase and. To redisplay the box, press the D.BOX soft key twice.The soft keys provide for one-touch call up of a desired function. The default softPlotter display, showing soft keysNote: Soft keys can be programmed for the radar, plotter and sounder displays. For further details see the following. Plotter: paragraph 5.2.2. Radar: paragraph 5.8.3. Sounder: paragraph 5.9.4The demonstration display provides simulated operation of the equipment to helpIt allows you to view andAll controls are operative, thus you may practice. To start the demonstration display;RadarPlotter, radar, sounder simulation mode selection windowsSIMULATION MODE (Plotter, sounder): Turns simulation mode on. SIMULATION MODE 1 (Radar): Uses standard demonstration display. SIMULATION MODE 2 (Radar): Uses data read into the unit from a networkLIVE: Turns simulation mode off.RETURN soft key.Do not cut off display unit.”If the network radar could not be found “Radar source is not found. Cannot getPDF Version: 1.3. Linearized: No. Producer: Adobe PDF Library 2.0. Page Count: 33. At InstructionsManuals.com we have gathered together the manuals to make it easier for you to locate them. We take no responsibility for the validity of the information available in each manual nor do we have any affiliation with the brands nor their products. (Sounders Furuno).

This information could be misleading for our customers. While mostitems are delivered very quickly we like to keep our customers informed.If you have ANY questions please always feel free to send an eBay message or call Max Marine Electronics Inc, Pompano Beach, Florida for help, assistance or more detailed information. We always want to be transparent with our customers and fully disclose any information regarding the products we sell. A solution-minded staff, well versed in product functionality, compatibility and repair, is key to your satisfaction.

The only personal information I save is in the site log which has a line for each page view which includes the IP address your browser sends in the header as well as which page you requested. I use this to block hackers and other bad actors. I do not use this raw data to create profiles on users. I periodically delete the log files.Because I do not track who you are, I cannot customize how these ads are served. They may be personalized to improve the ad experience. If you do not want personalized ads, please adjust the settings on the Google site HERE.. NOTE: The best I can determine, this site is not subject to CCPA but I am doing my best to comply anyway.It is for entertainment purposes only and should be independently verified before using for any other reason. There are five sources. 1) Documents and manuals from a variety of sources. These have not been checked for accuracy and in many cases have not even been read by anyone associated with L-36.com. I have no idea of they are useful or accurate, I leave that to the reader. 2) Articles others have written and submitted. If you have questions on these, please contact the author. 3) Articles that represent my personal opinions. These are intended to promote thought and for entertainment. These are not intended to be fact, they are my opinions. 4) Small programs that generate result presented on a web page. Like any computer program, these may and in some cases do have errors. Almost all of these also make simplifying assumptions so they are not totally accurate even if there are no errors. Please verify all results. 5) Weather information is from numerous of sources and is presented automatically. It is not checked for accuracy either by anyone at L-36.com or by the source which is typically the US Government. See the NOAA web site for their disclaimer. Finally, tide and current data on this site is from 2007 and 2008 data bases, which may contain even older data.

Changes in harbors due to building or dredging change tides and currents and for that reason many of the locations presented are no longer supported by newer data bases. For example, there is very little tidal current data in newer data bases so current data is likely wrong to some extent. This data is NOT FOR NAVIGATION. See the XTide disclaimer for details. In addition, tide and current are influenced by storms, river flow, and other factors beyond the ability of any predictive program. Discover everything Scribd has to offer, including books and audiobooks from major publishers. Start Free Trial Cancel anytime. FURUNO GMDSS Operator Manual.pdf Uploaded by Igor Santana da Silva 100% (2) 100% found this document useful (2 votes) 808 views 36 pages Document Information click to expand document information Description: GMDSS FURUNO Model RC-1800F2. Report this Document Download Now Save Save FURUNO GMDSS Operator Manual.pdf For Later 100% (2) 100% found this document useful (2 votes) 808 views 36 pages FURUNO GMDSS Operator Manual.pdf Uploaded by Igor Santana da Silva Description: GMDSS FURUNO Model RC-1800F2. Operator Manual Full description Save Save FURUNO GMDSS Operator Manual.pdf For Later 100% 100% found this document useful, Mark this document as useful 0% 0% found this document not useful, Mark this document as not useful Embed Share Print Download Now Jump to Page You are on page 1 of 36 Search inside document Browse Books Site Directory Site Language: English Change Language English Change Language. To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzes reviews to verify trustworthiness. See All Buying Options Add to Wish List Disabling it will result in some disabled or missing features. You can still see all customer reviews for the product. Please try again later.